ATi Catalyst™ 6.10

[no-X]

Online

New Features

This release of Catalyst® introduces the following new features:

* New Product Software Driver Support
* HDR + Anti-Aliasing support for The Elder Scrolls Oblivion

New Product Software Driver Support

This release of Catalyst® will provide software support for the following new ATI products:

* ATI Radeon® X1650 Pro
* ATI Radeon® 1950 XTX
* ATI Radeon® X1300 XT

HDR + Anti-Aliasing support for The Elder Scrolls Oblivion

Users no longer need to download and install the Chuck patch - the Direct3D driver now includes native support for High Dynamic Range and Anti-Aliasing with The Elder Scrolls Oblivion.
Performance Improvement

As with most Catalyst® releases, performance has increased in various situations. In this release of Catalyst® Intel 965 Crossfire performance increases due to improvements of the Crossfire D3D driver in handling large vertex meshes. Gains of 6.7-15.8% can be seen in 3DMark2006, 9.7-10.5% in 3DMark2005 and 3DMark2003 performance improves as much as 7.1%.
Issues Resolved in Catalyst® Software Suite 6.10

The following section provides a summary of the issues that are resolved in the latest release of Catalyst®. These include:

* 3DMark2006: Setting the display resolution to 1600x1200 and AA to either 4x or 6x no longer results in display corruption being noticed when running the HDR1 test. This issue was known to occur on certain specific systems only. Further details can be found in topic number 737-23443
* Anarchy-Online: Screen corruption is no longer noticed when walking or running through the terrain. Further details can be found in topic number 737-22016
* Black & White 2: Battle of the Gods: Intermittent display corruption is no longer noticed when playing the game in a system containing an ATI Radeon® X1900 series and running the Windows MCE operating system when setting the graphics options within the game to high details. Further details can be found in topic number 737-23275
* Commandos Strike Force: Enabling CrossFire™ and playing the game no longer results in display corruption being noticed when using an Intel 965 motherboard. Further details can be found in topic number 737-23444
* Godfather: Task switching between the game and the windows desktop no longer results in display corruption being noticed when playing the game at a display resolution of 1600x1200 (or higher) when having the in-game video options set to optimal quality. Further details can be found in topic number 737-23440
* Serious Sam 2: Playing the game on a system running the Windows MCE operating system and containing an ATI Radeon X1800 CrossFire™ Edition product no longer results in the operating system rebooting after approximately 20 minutes of game play when playing the game in a high setting windowed mode. Further details can be found in topic number 737-23445
* World of Warcraft: Playing the game for an extended period of time no longer results in the game failing to respond when using a Radeon® X800. Further details can be found in topic number 737-22632
* Catalyst® Control Center: Setting new clock values no longer results in the confirm changes dialog box failing to be displayed and clicking on cancel option may result in the new values still being applied. Further details can be found in topic number 737-23278
* Setting the display properties to prompt for a restart of the system when making a display resolution change, no longer results in the selected display resolution not being applied when clicking yes to restart the computer for the changes to take effect. Further details can be found in topic number 737-23279
* Connecting a CRT to a system containing an ATI Xpress 1150 series product followed by enabling extended desktop mode, no longer results in the both the LCD and the CRT failing to resume when attempting to resume from a standby state. Further details can be found in topic number 737-23434
* The LCD Panel Setting no longer becomes Use centered timings when resuming from suspend mode. Further details can be found in topic number 737-23435
* Display corruption is no longer noticed when switching between normal screen and full screen mode when viewing either a video or a picture slide show under the Windows Media Center Edition operating system using the Media Center application. Further details can be found in topic number 737-23436
* Installing the Catalyst® software driver on a system running the Windows XP Japanese version operating system no longer results in the .NET Framework version requirement dialog box being displayed in English. Further details can be found in topic number 737-23253
* Setting the display resolution to 1400x1080 on a system running the Windows XP operating system and containing an ATI Xpress 200 series product, no longer results in the display appearing jagged. Further details can be found in topic number 737-23437
* Playing a DVD using WinDVD no longer results in display corruption being noticed within the player when resizing the player window. Further details can be found in topic number 737-23256
* The ATI VPU Recover functionality no longer fails when using an ATI Radeon® X1900 series of products. Further details can be found in topic number 737-23438
* Catalyst® Control Center: Clicking the Enable ATI Overdrive clocks for 3D application only button followed by selecting the Preserve ATI Overdrive Settings at log on no longer results in a VPU recover event occurring when running the Automated Clock Configuration Utility. Further details can be found in topic number 737-23439
* CrossFire™: Enabling Wait for Vsync within the Catalyst® Control Center no longer results in display corruption being noticed within the 3D->Anti-aliasing aspect page when setting the pre-view to full-screen. Further details can be found in topic number 737-23441
* Catalyst® Control Center: Connecting a CRT and a TV to an ATI Radeon® X800 series of products no longer results in the display mode for the CRT being incorrect when selecting to swap the display devices and then cancelling the selection. Further details can be found in topic number 737-23442

[OBR]

Ze si dali chlapci tentokrat na cas ze, jen tak tak a byli to uz 6.11!
Hned zitra vyzkousim v sem jsou lepsi nez 6.10 RC2.

[no-X]

Měly by být stejný jako bety, jen certifikovaný.

[Delarge]

No slááááááva

[palda]

jelikoz hraju akorat Warrock, tak jsem si vsiml ze narust vykonu je skoro 100% pri zapnuti dynamic lighting a lightmaps... predtim, nechapu proc, to bylo kuli tomu skoro nehratelny (na X1300PRO)

[Delarge]

Takže po prvním ohledání, AA+HDR mi v Oblivionu stále nefunguje...

[Honys1983]

Nevim proc ale uz tam nemam polozku nastaveni vertikalni synchronizace (nebo jak to tam bylo napsany) proste zmizla.Mel jsem tam Drivery 6.8 z CD k 1950XTX a na jsem preinstaloval 6.10 ze by to bylo tim??? Mate tam tu polozku?????? Je asi lepsi komplet smaznout stare ovladace a pak tam hodit nove co.

Diky za rady

[HarY_cz]

Takže po prvním ohledání, AA+HDR mi v Oblivionu stále nefunguje...

a máš nastavenej aa v ccc? a nenechal jsi zaškrtnutý "let the application decide"?

[Honys1983]

Tak problem dela CZ lokalizace.Zkusil jsem to 3x a porad stejny problem, takze nestahujte CZ CCC.

[medas]

doufám že jsou lepší než předchozí (rozpadávání textur )
už jdu na ne

[Delarge]

a máš nastavenej aa v ccc? a nenechal jsi zaškrtnutý "let the application decide"?

Jasně, nastavený to mam. Ale kašlu na to už, stejně už Oblivion moc nehraju...

[l0k2]

Neklesol vam vykon? skuste si nejake 3dmark.. mne napr. namiesto 23tis, hodila 03ka iba 18tis.. sakra velky rozdiel a to som menil iba drivery. Catalyst ostal nezmeneny.

[Delarge]

Neklesol vam vykon? skuste si nejake 3dmark.. mne napr. namiesto 23tis, hodila 03ka iba 18tis.. sakra velky rozdiel a to som menil iba drivery. Catalyst ostal nezmeneny.

Zkoušel sem 3dM05 a score o nepatrně kleslo. Neviděl bych v tom nějak vážnej problém, přeci jenom 3dMarky se nehrajou...A ve hrách sem si nějakýho propadu nevšiml.

[StanleyS]

kurna mi zmizeli v oblivionu postavy schit

[izerS18]

Co se týče 3dMarku tak výsledky mám +-0b. Nic se nezměnilo. Ve hře FEAR Extraction Point mi to přijde ale,že výkon je větší. Ještě to musím FRAPSem změřit přesně.

[Sentenced]

Neklesol vam vykon? skuste si nejake 3dmark.. mne napr. namiesto 23tis, hodila 03ka iba 18tis.. sakra velky rozdiel a to som menil iba drivery. Catalyst ostal nezmeneny.

To jsem nejak nepobral Mas nejakej důvod proč toho updatovat jen půlku ? Docela zvláštní řešení ...

Jinak marky (01-06) jsou na x1900xt vicemene stejny jak v 6.8. Stíný v CoH stojí furt za prd ..

[Delarge]

kurna mi zmizeli v oblivionu postavy schit

A co to má co dělat s ovladačema?

To jsem nejak nepobral Mas nejakej důvod proč toho updatovat jen půlku ? Docela zvláštní řešení ...

Jinak marky (01-06) jsou na x1900xt vicemene stejny jak v 6.8. Stíný v CoH stojí furt za prd ..

Asi to myslel tak, že stahoval jenom Display Driver bez CCC a podobnejch peetchovinek, ostatně já to dělam taky. A místo CCC používam Ati Tray Tools...

No a možná, že to nakonec souvisí s tim, proč mi nejde HDR+AA v Oblivionu.

[Sentenced]

2Delarge: Jasan, ohledne ATT je to každyho volba, ale proč použít novej driver a stary CCC - to mi nejak uniká

[Delarge]

2Delarge: Jasan, ohledne ATT je to každyho volba, ale proč použít novej driver a stary CCC - to mi nejak uniká

No to je pravda, jestli používá CCC, tak to moc smysl nemá

[OBR]

je nutno stahnout i CCC, protoze v teto nove verzi je "nejak vylepsene". Vzdy se vyplati stahnout cely Catalyst balik, a pokud to neudelas nediv se ze ti nefunguje neco jak ma ....