Vzhledem k (pravděpodobně) ukončené podpoře pro RTSS zde zakládám vlákno pro obecné řešení náhradních toolů k zobrazení FPS a dalších statistik kolem HW.
Co kdo používá, jaký config, jaké má co nároky atd.
Pravděpodobně skončím u CapFrameX, ale co jsem pochopil, tak je u něj potřeba mít jak RTSS, tak CapFrameX, což jsou dva další "zbytečné" tooly.
Hraju si i overlayem, který je součástí AMD driveru, je to sice dost omezené a někdy se blbě ukazuje v idle/v hrách, ale zas není potřeba mít nic dalšího.
Pochlubte se, co kdo používá a sdílněte i jak to vypadá + případný config.
Naposledy upravil(a) mouldy dne ned 24. lis 2024, 21:21, celkem upraveno 1 x.
ja uz veelmi dlho pouzivam toto https://fpsmon.com/en/ prekne vsetko sa da prisposobit od farby az po viditelnost atd.... dovolim si povedat ze je to asi nejlepsie prisposobitelny nastroj na meranie fps a hw. len je to demo a potom zaplatit 10e
Amd R7 5800x3d = Noctua d15 = Asus strix b550f = Kingston 64gb ram 3600mhz cl18 = Rtx 4090 Phantom = Ssd: M2 WD 850x 1tb win10 + M2 WD 850x 2tb + 850 evo 2tb = Lian Li 216 black = Fany: 2x Lian Li 160mm-in + 3x Noctua a12x25-out + 2x Noctua a12x25-bottom = Asus strix 1kw aura = LG C2 42" = Per: Log g915 tkl + Log g pro wire + g440 hard + Xbox Wire Controller = Audio: Topping dx3pro+ = Mackie mr524 = AudioTechnica-a550z
satanicek666 píše: ↑pon 25. lis 2024, 09:15
ja uz veelmi dlho pouzivam toto https://fpsmon.com/en/ prekne vsetko sa da prisposobit od farby az po viditelnost atd.... dovolim si povedat ze je to asi nejlepsie prisposobitelny nastroj na meranie fps a hw. len je to demo a potom zaplatit 10e
1, I couldn't find an easy way to take a screenshot using a keyboard shortcut. There is no screenshot feature in CapFrameX, RTSS has that functionality already.
2, I used a ready-made template for AMD+AMD, slightly modified it, tried to reduce the font to 70%, but the spacing between lines remained the same, so the OSD takes up a huge amount of space very inefficiently. Can this be adjusted better? There is no option for the size of the line separators, but if you want the whole overlay to be smaller, instead of adjusting the font size for every entry, a better way would be to resize it inside RTSS. That is if you didn't already set it to minimum size there.
3, In RTSS, I was used to displaying information in a row, for example: GPU - clock, vram, temperature, hotspot, fan speed, voltage... all values one after another, it takes up minimal space and is efficient. Can this be done here as well? Every entry that has the same group name appears in the same row and the order inside that row is determined by the order in the overly entry list. Note that the match for "same group name" also includes the font size and color.
4, I miss some sensors in CapFrameX, such as VRAM temperature or SSD temperature. Can they be added? We're only using sensors available from the CPU+GPU libraries as it's too much to include and maintain every possible sensor so we're focused on the ones most important for benchmarking those two components. For any sensor that's not included, I'd recommend using HWInfo to add another line within RTSS to show those sensors.
Používání HWinfo jako overlay s Corsair iCUE: If you need iCUE and don't need to see the cooler data in HWiNFO, you can disable the "CorsairLink and Asetek Support" option in HWiNFO.
