Chybne nast. sshd (Nejmene narocna distribuce... - vyreseno)

mr.mike · Příspěvek od **mr.mike** » ned 25. kvě 2008, 19:54

a co by se stalo kdybych ten kernel co je na live dal na hdd a v grubu na nej odkazoval ? jak moc by se to lisilo ?

bubanek · Příspěvek od **bubanek** » ned 25. kvě 2008, 19:59

no, live cd generuje kernel v závislosti na tom, jakou máš sestavu a uloží ho (nevím kam)

můžeš použít nástroj genkernel, který nastaví jádro za tebe (bude v podstatě stejné jako to nastavené z live cd)
víc o tom najdeš v tom návodě, který jsem sem nedávno psal (česká verze)

mr.mike · Příspěvek od **mr.mike** » pon 26. kvě 2008, 14:21

mohl by si mi budto sem napsat link nebo ho poslat na SZ ?)

tak jsem neco nasel na http://www.gentoo.org/doc/cs/handbook/h ... t=1&chap=7

kdyz z livecd nachrootuju tak co s tim starym kernelem ? a vubec jak ho prepsat ?

bubanek · Příspěvek od **bubanek** » pon 26. kvě 2008, 14:54

použiješ ho podle toho návodu
ten starý můžeš smazat nebo ho tam nechat, ale nesmíš zapomenout přenastavit grub

mr.mike · Příspěvek od **mr.mike** » pon 26. kvě 2008, 15:01

a to je vse ? vzdyt tam se pise neco o init.d

ps:uz se to instaluje a kompiluje... budu ti verit

mr.mike · Příspěvek od **mr.mike** » pon 26. kvě 2008, 19:35

cetl sem tam ze se to instaluje vyrazne dyl ale ze uz to neco dela prez 3hodiny

to je sila

bubanek · Příspěvek od **bubanek** » pon 26. kvě 2008, 19:48

nesmíš se divit, kompiluje se to s podporou snad všeho možnýho
záleží na jakém to děláš stroji...

mr.mike · Příspěvek od **mr.mike** » pon 26. kvě 2008, 20:02

.config:648

trying to assign nonexistent symbol IDEDMA_AUTO
.config:702

trying to assign nonexistent symbol AIC7XXX_PROBE_EISA_VL
.config:710

trying to assign nonexistent symbol AIC79XX_ENABLE_RD_STRM
.config:757

trying to assign nonexistent symbol 53C700_IO_MAPPED
.config:798

trying to assign nonexistent symbol SATA_INTEL_COMBINED
.config:841

trying to assign nonexistent symbol CD_NO_IDESCSI
.config:886

trying to assign nonexistent symbol IEEE1394_OUI_DB
.config:887

trying to assign nonexistent symbol IEEE1394_EXTRA_CONFIG_ROMS
.config:888

trying to assign nonexistent symbol IEEE1394_CONFIG_ROM_IP1394
.config:889

trying to assign nonexistent symbol IEEE1394_EXPORT_FULL_API
.config

warning: trying to assign nonexistent symbol DGRS
.config

warning: trying to assign nonexistent symbol NET_RADIO
.config

warning: trying to assign nonexistent symbol NET_WIRELESS_RTNETLINK
.config

warning: trying to assign nonexistent symbol NET_WIRELESS
.config

warning: trying to assign nonexistent symbol DLCI_COUNT
.config

warning: trying to assign nonexistent symbol INPUT_TSDEV
.config

warning: trying to assign nonexistent symbol DVB
.config

warning: trying to assign nonexistent symbol FB_VESA_STD
.config

warning: trying to assign nonexistent symbol FB_VESA_TNG
.config

warning: trying to assign nonexistent symbol FB_SPLASH
.config

warning: trying to assign nonexistent symbol SPEAKUP
.config

warning: trying to assign nonexistent symbol SPEAKUP_ACNTSA
.config

warning: trying to assign nonexistent symbol SPEAKUP_ACNTPC
.config

warning: trying to assign nonexistent symbol SPEAKUP_APOLLO
.config

warning: trying to assign nonexistent symbol SPEAKUP_AUDPTR
.config

warning: trying to assign nonexistent symbol SPEAKUP_BNS
.config

warning: trying to assign nonexistent symbol SPEAKUP_DECTLK
.config

warning: trying to assign nonexistent symbol SPEAKUP_DECEXT
.config

warning: trying to assign nonexistent symbol SPEAKUP_DECPC
.config

warning: trying to assign nonexistent symbol SPEAKUP_DTLK
.config

warning: trying to assign nonexistent symbol SPEAKUP_KEYPC
.config

warning: trying to assign nonexistent symbol SPEAKUP_LTLK
.config

warning: trying to assign nonexistent symbol SPEAKUP_SFTSYN
.config

warning: trying to assign nonexistent symbol SPEAKUP_SPKOUT
.config

warning: trying to assign nonexistent symbol SPEAKUP_TXPRT
.config

warning: trying to assign nonexistent symbol SPEAKUP_DEFAULT
.config

warning: trying to assign nonexistent symbol USB_BANDWIDTH
.config

warning: trying to assign nonexistent symbol USB_OHCI_BIG_ENDIAN
.config

warning: trying to assign nonexistent symbol USB_HIDINPUT
.config

warning: trying to assign nonexistent symbol USB_AIPTEK
.config

warning: trying to assign nonexistent symbol USB_WACOM
.config

warning: trying to assign nonexistent symbol USB_ACECAD
.config

warning: trying to assign nonexistent symbol USB_KBTAB
.config

warning: trying to assign nonexistent symbol USB_POWERMATE
.config

warning: trying to assign nonexistent symbol USB_TOUCHSCREEN
.config

warning: trying to assign nonexistent symbol USB_YEALINK
.config

warning: trying to assign nonexistent symbol USB_XPAD
.config

warning: trying to assign nonexistent symbol USB_ATI_REMOTE
.config

warning: trying to assign nonexistent symbol USB_ATI_REMOTE2
.config

warning: trying to assign nonexistent symbol USB_KEYSPAN_REMOTE
.config

warning: trying to assign nonexistent symbol USB_APPLETOUCH
.config

warning: trying to assign nonexistent symbol USB_USBNET_MII
.config

warning: symbol value 'm' invalid for RTC_INTF_SYSFS
.config

warning: symbol value 'm' invalid for RTC_INTF_PROC
.config

warning: symbol value 'm' invalid for RTC_INTF_DEV
.config

warning: trying to assign nonexistent symbol ZISOFS_FS
.config

warning: trying to assign nonexistent symbol RAMFS
.config

warning: trying to assign nonexistent symbol SQUASHFS_VMALLOC
.config

warning: trying to assign nonexistent symbol UNWIND_INFO
--
2. MMConfig (PCI_GOMMCONFIG)
3. Direct (PCI_GODIRECT)
> 4. Any (PCI_GOANY)
choice[1-4?]: 4
PCI Express support (PCIEPORTBUS) [Y/n/?] y
Root Port Advanced Error Reporting support (PCIEAER) [Y/n/?] y
--
SCSI media changer support (CHR_DEV_SCH) [N/m/y/?] n
*
* Some SCSI devices (e.g. CD jukebox) support multiple LUNs
*
Probe all LUNs on each SCSI device (SCSI_MULTI_LUN) [N/y/?] n
Verbose SCSI error reporting (kernel size +=12K) (SCSI_CONSTANTS) [N/y/?] n
--
Compile in debug mode (AIC94XX_DEBUG) [N/y/?] n
Adaptec I2O RAID support (SCSI_DPT_I2O) [M/n/y/?] m
AdvanSys SCSI support (SCSI_ADVANSYS) [M/n/y/?] m
Always IN2000 SCSI support (SCSI_IN2000) [M/n/y/?] m
ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID Host Adapter (SCSI_ARCMSR) [M/n/y/?] m
Enable PCI Error Recovery Capability in Areca Driver(ARCMSR) (SCSI_ARCMSR_AER) [N/y/?] (NEW) LSI Logic New Generation RAID Device Drivers (MEGARAID_NEWGEN) [Y/n/?] y
--
Mellanox ConnectX HCA support (MLX4_INFINIBAND) [N/m/?] (NEW) IP-over-InfiniBand (INFINIBAND_IPOIB) [M/n/?] m
IP-over-InfiniBand Connected Mode support (INFINIBAND_IPOIB_CM) [N/y/?] (NEW) IP-over-InfiniBand debugging (INFINIBAND_IPOIB_DEBUG) [N/y/?] n
InfiniBand SCSI RDMA Protocol (INFINIBAND_SRP) [M/n/?] m
iSCSI Extensions for RDMA (iSER) (INFINIBAND_ISER) [M/n/?] m
*
* EDAC - error detection and reporting (EXPERIMENTAL)
*
EDAC - error detection and reporting (EXPERIMENTAL) (EDAC) [N/y/?] n
--
LD kernel/irq/built-in.o
CC kernel/power/main.o
CC mm/pdflush.o
CC mm/readahead.o
CC kernel/power/pm.o
kernel/power/pm.c:203: warning: 'pm_register' is deprecated (declared at kernel/power/pm.c:62)
kernel/power/pm.c:203: warning: 'pm_register' is deprecated (declared at kernel/power/pm.c:62)
kernel/power/pm.c:204: warning: 'pm_send_all' is deprecated (declared at kernel/power/pm.c:178)
kernel/power/pm.c:204: warning: 'pm_send_all' is deprecated (declared at kernel/power/pm.c:178)
--
LD fs/ntfs/built-in.o
CC fs/partitions/check.o
CC drivers/base/bus.o
CC drivers/base/dd.o
fs/partitions/check.c: In function 'add_partition':
fs/partitions/check.c:393: warning: ignoring return value of 'kobject_add', declared with attribute warn_unused_result
fs/partitions/check.c:396: warning: ignoring return value of 'sysfs_create_link', declared with attribute warn_unused_result
fs/partitions/check.c:403: warning: ignoring return value of 'sysfs_create_file', declared with attribute warn_unused_result
--
CC drivers/pci/quirks.o
CC fs/xfs/xfs_dir2_leaf.o
CC drivers/pci/pci-driver.o
CC drivers/pci/search.o
drivers/pci/search.c: In function 'pci_find_slot':
drivers/pci/search.c:135: warning: 'pci_find_device' is deprecated (declared at include/linux/pci.h:492)
drivers/pci/search.c: At top level:
drivers/pci/search.c:478: warning: 'pci_find_device' is deprecated (declared at drivers/pci/search.c:283)
drivers/pci/search.c:478: warning: 'pci_find_device' is deprecated (declared at drivers/pci/search.c:283)
drivers/pci/search.c:479: warning: 'pci_find_slot' is deprecated (declared at drivers/pci/search.c:132)
drivers/pci/search.c:479: warning: 'pci_find_slot' is deprecated (declared at drivers/pci/search.c:132)
--
CALL scripts/checksyscalls.sh
AS [M] arch/x86/crypto/aes-i586-asm_32.o
CC [M] arch/x86/crypto/aes_32.o
CC [M] arch/x86/kernel/apm_32.o
arch/x86/kernel/apm_32.c: In function 'suspend':
arch/x86/kernel/apm_32.c

warning: 'pm_send_all' is deprecated (declared at include/linux/pm_legacy.h:16)
arch/x86/kernel/apm_32.c

warning: 'pm_send_all' is deprecated (declared at include/linux/pm_legacy.h:16)
arch/x86/kernel/apm_32.c: In function 'check_events':
arch/x86/kernel/apm_32.c

warning: 'pm_send_all' is deprecated (declared at include/linux/pm_legacy.h:16)
--
CC [M] crypto/blkcipher.o
CC [M] crypto/sha1_generic.o
CC [M] fs/cifs/dir.o
CC [M] crypto/sha256_generic.o
fs/cifs/dir.c: In function 'cifs_ci_compare':
fs/cifs/dir.c:596: warning: passing argument 1 of '__constant_memcpy' discards qualifiers from pointer target type
fs/cifs/dir.c:596: warning: passing argument 1 of '__memcpy' discards qualifiers from pointer target type
--
CC [M] drivers/ide/pci/siimage.o
CC [M] net/bluetooth/hci_sock.o
CC [M] drivers/ieee1394/ieee1394_core.o
CC [M] net/bluetooth/hci_sysfs.o
net/bluetooth/hci_sysfs.c: In function 'del_conn':
net/bluetooth/hci_sysfs.c:339: warning: suggest parentheses around assignment used as truth value
--
CC [M] drivers/isdn/hardware/eicon/message.o
CC [M] drivers/md/dm-log.o
CC [M] drivers/md/dm-raid1.o
CC [M] drivers/md/dm.o
{standard input}: Assembler messages:
{standard input}

Warning: end of file in string; inserted '"'
gcc: Internal error: Killed (program cc1)
Please submit a full bug report.
See <URL:http://bugs.gentoo.org/> for instructions.
make[4]: *** [drivers/isdn/hardware/eicon/message.o] Error 1
make[3]: *** [drivers/isdn/hardware/eicon] Error 2
make[2]: *** [drivers/isdn/hardware] Error 2
make[1]: *** [drivers/isdn] Error 2
--
LD [M] drivers/md/raid456.o
LD [M] drivers/md/dm-mod.o
LD [M] drivers/md/dm-multipath.o
LD [M] drivers/md/dm-snapshot.o
LD [M] drivers/md/dm-mirror.o
make: *** [drivers] Error 2
* Gentoo Linux Genkernel; Version 3.4.9
* Running with options: all

* ERROR: Failed to compile the "modules" target...

* -- End log... --

* Please consult /var/log/genkernel.log for more information and any
* errors that were reported above.

* Report any genkernel bugs to bugs.gentoo.org and
* assign your bug to genkernel@gentoo.org. Please include
* as much information as you can in your bug report; attaching
* /var/log/genkernel.log so that your issue can be dealt with effectively.
*
* Please do *not* report compilation failures as genkernel bugs!
*

vadi to ?

bubanek · Příspěvek od **bubanek** » pon 26. kvě 2008, 20:05

no ty krávo, jdu to přelouskat...

tak a nemám naprosto žádné ponětí, co se to stalo.
co když to zkusíš spustit (udělej si na to novou položku v grubu,kdyby se něco "náhodou" podělalo)

mr.mike · Příspěvek od **mr.mike** » pon 26. kvě 2008, 20:18

hehe pozde jsem mladej a blbej takze jsem smazal starej kernel ale s timhle to vklidku nabootovalo ovsem ta chyba se stiti zustala

bubanek · Příspěvek od **bubanek** » pon 26. kvě 2008, 20:24

tak to netuším

mr.mike · Příspěvek od **mr.mike** » pon 26. kvě 2008, 20:29

jedine me napada sosnout cely instalacni CD a pak ho tam nomalne dat...

ps:ale celkem me to depta ja zitra jedu do svycarska a prijedu v nedeli takze na to nebude cas..

a nebudu kvuli tomu spat

Josko · Příspěvek od **Josko** » pon 26. kvě 2008, 20:33

Tak neviem teda prečo ti to vyhadzuje tie errory.
Ale v každom prípade sem hoď ten lspci a najlepšie, keď na live cd kde ti sieť ide dáš lsmod a ten sem tiež skopíruješ a uvidíme ktorý modul používa sieťovka a potom ho bude stačiť naloadovať pomocou príkazu modprobe <modul>.

mr.mike · Příspěvek od **mr.mike** » pon 26. kvě 2008, 20:34

oukej du to nabootvat...

mr.mike · Příspěvek od **mr.mike** » pon 26. kvě 2008, 20:42

takze :

livecd ~ # lspci
00:00.0 Host bridge: Intel Corporation 440LX/EX - 82443LX/EX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440LX/EX - 82443LX/EX AGP bridge (rev 03)
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:10.0 Ethernet controller: VIA Technologies, Inc. VT6105 [Rhine-III] (rev 86)
01:00.0 VGA compatible controller: S3 Inc. Trio 64 3D (rev 01)

a

lsmod :

livecd ~ # lsmod
Module Size Used by
ipv6 170912 12
3w_9xxx 25604 0
via_rhine 14472 0
mii 3968 1 via_rhine
rtc 7476 0
tg3 88324 0
e1000 90432 0
nfs 85180 0
lockd 41352 1 nfs
sunrpc 99644 2 nfs,lockd
jfs 143340 0
dm_mirror 13008 0
dm_mod 31896 1 dm_mirror
pdc_adma 4868 0
sata_mv 11656 0
ata_piix 8072 0
ahci 11268 0
sata_qstor 4996 0
sata_vsc 4100 0
sata_uli 3204 0
sata_sis 3844 0
sata_sx4 8452 0
sata_nv 4740 0
sata_via 4868 0
sata_svw 3844 0
sata_sil24 8708 0
sata_sil 5384 0
sata_promise 6276 0
libata 61460 15 pdc_adma,sata_mv,ata_piix,ahci,sata_qstor,sata_vsc,sata_uli,sata_sis,sata_sx4,sata_nv,sata_via,sata_svw,sata_sil24,sata_sil,sata_promise
sbp2 15364 0
ohci1394 24880 0
ieee1394 53176 2 sbp2,ohci1394
sl811_hcd 8320 0
usbhid 29792 0
ohci_hcd 13572 0
uhci_hcd 15240 0
usb_storage 57280 0
ehci_hcd 19976 0
usbcore 78084 7 sl811_hcd,usbhid,ohci_hcd,uhci_hcd,usb_storage,ehci_hcd

*****:jak tak na to koukam tak to haze sitovku via coz je zvlastni pac je tam d-link ... ale tak funguje to

**jako ze funguje to v live verzi ne normalne

Josko · Příspěvek od **Josko** » pon 26. kvě 2008, 20:57

Je to síce d-link ale dôležitý je čip a ten je zrejme via...
Super, takže všetko čo potrebuješ urobiť je zadať na tvojom systéme:

Kód: Vybrat vše

modprobe via_rhine

A ak potom pôjde sieť tak ho treba pridať do:
/etc/modules
toto:
via_rhine
Aby sa načítaval automaticky pri štarte.

mr.mike · Příspěvek od **mr.mike** » úte 27. kvě 2008, 15:00

ok zkusim

mr.mike · Příspěvek od **mr.mike** » úte 27. kvě 2008, 15:20

tak jsem zkusil a nafackovalo mi to ze nezna via_rhine coz mi prislo divny tak jsem dal lspci a hle nafackovalo mi to... videl bych to na to ze bude problem o5 v tom jadre takze zkusim zkompilovat new kernel klasicky jak je to v tom navodu .... a pak to udelam....

ps:uz se to kompiluje

OndraSter · Příspěvek od **OndraSter** » stř 28. kvě 2008, 14:33

v tom kernelu nesmis zapomenout dat ten ovladac sitovky (via_rhine) jako modul/zakompilovat primo do jadra (a pak neni potreba modprobe).

Ja osobne jsem si Tulipa zakompiloval primo do jadra

mr.mike · Příspěvek od **mr.mike** » ned 1. čer 2008, 15:42

mjo dneska sem prijel ze svajzu takze pak to nak zkusim ... diky