PCTuning fórum

a co by se stalo kdybych ten kernel co je na live dal na hdd a v grubu na nej odkazoval ? jak moc by se to lisilo ?

no, live cd generuje kernel v závislosti na tom, jakou máš sestavu a uloží ho (nevím kam)

můžeš použít nástroj genkernel, který nastaví jádro za tebe (bude v podstatě stejné jako to nastavené z live cd)
víc o tom najdeš v tom návodě, který jsem sem nedávno psal (česká verze)

mohl by si mi budto sem napsat link nebo ho poslat na SZ ?)


tak jsem neco nasel na http://www.gentoo.org/doc/cs/handbook/h ... t=1&chap=7

kdyz z livecd nachrootuju tak co s tim starym kernelem ? a vubec jak ho prepsat ?

použiješ ho podle toho návodu
ten starý můžeš smazat nebo ho tam nechat, ale nesmíš zapomenout přenastavit grub

a to je vse ? vzdyt tam se pise neco o init.d


ps:uz se to instaluje a kompiluje... budu ti verit

cetl sem tam ze se to instaluje vyrazne dyl ale ze uz to neco dela prez 3hodiny to je sila

nesmíš se divit, kompiluje se to s podporou snad všeho možnýho
záleží na jakém to děláš stroji...

.config:648 trying to assign nonexistent symbol IDEDMA_AUTO
.config:702 trying to assign nonexistent symbol AIC7XXX_PROBE_EISA_VL
.config:710 trying to assign nonexistent symbol AIC79XX_ENABLE_RD_STRM
.config:757 trying to assign nonexistent symbol 53C700_IO_MAPPED
.config:798 trying to assign nonexistent symbol SATA_INTEL_COMBINED
.config:841 trying to assign nonexistent symbol CD_NO_IDESCSI
.config:886 trying to assign nonexistent symbol IEEE1394_OUI_DB
.config:887 trying to assign nonexistent symbol IEEE1394_EXTRA_CONFIG_ROMS
.config:888 trying to assign nonexistent symbol IEEE1394_CONFIG_ROM_IP1394
.config:889 trying to assign nonexistent symbol IEEE1394_EXPORT_FULL_API
.configwarning: trying to assign nonexistent symbol DGRS
.configwarning: trying to assign nonexistent symbol NET_RADIO
.configwarning: trying to assign nonexistent symbol NET_WIRELESS_RTNETLINK
.configwarning: trying to assign nonexistent symbol NET_WIRELESS
.configwarning: trying to assign nonexistent symbol DLCI_COUNT
.configwarning: trying to assign nonexistent symbol INPUT_TSDEV
.configwarning: trying to assign nonexistent symbol DVB
.configwarning: trying to assign nonexistent symbol FB_VESA_STD
.configwarning: trying to assign nonexistent symbol FB_VESA_TNG
.configwarning: trying to assign nonexistent symbol FB_SPLASH
.configwarning: trying to assign nonexistent symbol SPEAKUP
.configwarning: trying to assign nonexistent symbol SPEAKUP_ACNTSA
.configwarning: trying to assign nonexistent symbol SPEAKUP_ACNTPC
.configwarning: trying to assign nonexistent symbol SPEAKUP_APOLLO
.configwarning: trying to assign nonexistent symbol SPEAKUP_AUDPTR
.configwarning: trying to assign nonexistent symbol SPEAKUP_BNS
.configwarning: trying to assign nonexistent symbol SPEAKUP_DECTLK
.configwarning: trying to assign nonexistent symbol SPEAKUP_DECEXT
.configwarning: trying to assign nonexistent symbol SPEAKUP_DECPC
.configwarning: trying to assign nonexistent symbol SPEAKUP_DTLK
.configwarning: trying to assign nonexistent symbol SPEAKUP_KEYPC
.configwarning: trying to assign nonexistent symbol SPEAKUP_LTLK
.configwarning: trying to assign nonexistent symbol SPEAKUP_SFTSYN
.configwarning: trying to assign nonexistent symbol SPEAKUP_SPKOUT
.configwarning: trying to assign nonexistent symbol SPEAKUP_TXPRT
.configwarning: trying to assign nonexistent symbol SPEAKUP_DEFAULT
.configwarning: trying to assign nonexistent symbol USB_BANDWIDTH
.configwarning: trying to assign nonexistent symbol USB_OHCI_BIG_ENDIAN
.configwarning: trying to assign nonexistent symbol USB_HIDINPUT
.configwarning: trying to assign nonexistent symbol USB_AIPTEK
.configwarning: trying to assign nonexistent symbol USB_WACOM
.configwarning: trying to assign nonexistent symbol USB_ACECAD
.configwarning: trying to assign nonexistent symbol USB_KBTAB
.configwarning: trying to assign nonexistent symbol USB_POWERMATE
.configwarning: trying to assign nonexistent symbol USB_TOUCHSCREEN
.configwarning: trying to assign nonexistent symbol USB_YEALINK
.configwarning: trying to assign nonexistent symbol USB_XPAD
.configwarning: trying to assign nonexistent symbol USB_ATI_REMOTE
.configwarning: trying to assign nonexistent symbol USB_ATI_REMOTE2
.configwarning: trying to assign nonexistent symbol USB_KEYSPAN_REMOTE
.configwarning: trying to assign nonexistent symbol USB_APPLETOUCH
.configwarning: trying to assign nonexistent symbol USB_USBNET_MII
.configwarning: symbol value 'm' invalid for RTC_INTF_SYSFS
.configwarning: symbol value 'm' invalid for RTC_INTF_PROC
.configwarning: symbol value 'm' invalid for RTC_INTF_DEV
.configwarning: trying to assign nonexistent symbol ZISOFS_FS
.configwarning: trying to assign nonexistent symbol RAMFS
.configwarning: trying to assign nonexistent symbol SQUASHFS_VMALLOC
.configwarning: trying to assign nonexistent symbol UNWIND_INFO
--
2. MMConfig (PCI_GOMMCONFIG)
3. Direct (PCI_GODIRECT)
> 4. Any (PCI_GOANY)
choice[1-4?]: 4
PCI Express support (PCIEPORTBUS) [Y/n/?] y
Root Port Advanced Error Reporting support (PCIEAER) [Y/n/?] y
--
SCSI media changer support (CHR_DEV_SCH) [N/m/y/?] n
*
* Some SCSI devices (e.g. CD jukebox) support multiple LUNs
*
Probe all LUNs on each SCSI device (SCSI_MULTI_LUN) [N/y/?] n
Verbose SCSI error reporting (kernel size +=12K) (SCSI_CONSTANTS) [N/y/?] n
--
Compile in debug mode (AIC94XX_DEBUG) [N/y/?] n
Adaptec I2O RAID support (SCSI_DPT_I2O) [M/n/y/?] m
AdvanSys SCSI support (SCSI_ADVANSYS) [M/n/y/?] m
Always IN2000 SCSI support (SCSI_IN2000) [M/n/y/?] m
ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID Host Adapter (SCSI_ARCMSR) [M/n/y/?] m
Enable PCI Error Recovery Capability in Areca Driver(ARCMSR) (SCSI_ARCMSR_AER) [N/y/?] (NEW) LSI Logic New Generation RAID Device Drivers (MEGARAID_NEWGEN) [Y/n/?] y
--
Mellanox ConnectX HCA support (MLX4_INFINIBAND) [N/m/?] (NEW) IP-over-InfiniBand (INFINIBAND_IPOIB) [M/n/?] m
IP-over-InfiniBand Connected Mode support (INFINIBAND_IPOIB_CM) [N/y/?] (NEW) IP-over-InfiniBand debugging (INFINIBAND_IPOIB_DEBUG) [N/y/?] n
InfiniBand SCSI RDMA Protocol (INFINIBAND_SRP) [M/n/?] m
iSCSI Extensions for RDMA (iSER) (INFINIBAND_ISER) [M/n/?] m
*
* EDAC - error detection and reporting (EXPERIMENTAL)
*
EDAC - error detection and reporting (EXPERIMENTAL) (EDAC) [N/y/?] n
--
LD kernel/irq/built-in.o
CC kernel/power/main.o
CC mm/pdflush.o
CC mm/readahead.o
CC kernel/power/pm.o
kernel/power/pm.c:203: warning: 'pm_register' is deprecated (declared at kernel/power/pm.c:62)
kernel/power/pm.c:203: warning: 'pm_register' is deprecated (declared at kernel/power/pm.c:62)
kernel/power/pm.c:204: warning: 'pm_send_all' is deprecated (declared at kernel/power/pm.c:178)
kernel/power/pm.c:204: warning: 'pm_send_all' is deprecated (declared at kernel/power/pm.c:178)
--
LD fs/ntfs/built-in.o
CC fs/partitions/check.o
CC drivers/base/bus.o
CC drivers/base/dd.o
fs/partitions/check.c: In function 'add_partition':
fs/partitions/check.c:393: warning: ignoring return value of 'kobject_add', declared with attribute warn_unused_result
fs/partitions/check.c:396: warning: ignoring return value of 'sysfs_create_link', declared with attribute warn_unused_result
fs/partitions/check.c:403: warning: ignoring return value of 'sysfs_create_file', declared with attribute warn_unused_result
--
CC drivers/pci/quirks.o
CC fs/xfs/xfs_dir2_leaf.o
CC drivers/pci/pci-driver.o
CC drivers/pci/search.o
drivers/pci/search.c: In function 'pci_find_slot':
drivers/pci/search.c:135: warning: 'pci_find_device' is deprecated (declared at include/linux/pci.h:492)
drivers/pci/search.c: At top level:
drivers/pci/search.c:478: warning: 'pci_find_device' is deprecated (declared at drivers/pci/search.c:283)
drivers/pci/search.c:478: warning: 'pci_find_device' is deprecated (declared at drivers/pci/search.c:283)
drivers/pci/search.c:479: warning: 'pci_find_slot' is deprecated (declared at drivers/pci/search.c:132)
drivers/pci/search.c:479: warning: 'pci_find_slot' is deprecated (declared at drivers/pci/search.c:132)
--
CALL scripts/checksyscalls.sh
AS [M] arch/x86/crypto/aes-i586-asm_32.o
CC [M] arch/x86/crypto/aes_32.o
CC [M] arch/x86/kernel/apm_32.o
arch/x86/kernel/apm_32.c: In function 'suspend':
arch/x86/kernel/apm_32.c warning: 'pm_send_all' is deprecated (declared at include/linux/pm_legacy.h:16)
arch/x86/kernel/apm_32.c warning: 'pm_send_all' is deprecated (declared at include/linux/pm_legacy.h:16)
arch/x86/kernel/apm_32.c: In function 'check_events':
arch/x86/kernel/apm_32.c warning: 'pm_send_all' is deprecated (declared at include/linux/pm_legacy.h:16)
--
CC [M] crypto/blkcipher.o
CC [M] crypto/sha1_generic.o
CC [M] fs/cifs/dir.o
CC [M] crypto/sha256_generic.o
fs/cifs/dir.c: In function 'cifs_ci_compare':
fs/cifs/dir.c:596: warning: passing argument 1 of '__constant_memcpy' discards qualifiers from pointer target type
fs/cifs/dir.c:596: warning: passing argument 1 of '__memcpy' discards qualifiers from pointer target type
--
CC [M] drivers/ide/pci/siimage.o
CC [M] net/bluetooth/hci_sock.o
CC [M] drivers/ieee1394/ieee1394_core.o
CC [M] net/bluetooth/hci_sysfs.o
net/bluetooth/hci_sysfs.c: In function 'del_conn':
net/bluetooth/hci_sysfs.c:339: warning: suggest parentheses around assignment used as truth value
--
CC [M] drivers/isdn/hardware/eicon/message.o
CC [M] drivers/md/dm-log.o
CC [M] drivers/md/dm-raid1.o
CC [M] drivers/md/dm.o
{standard input}: Assembler messages:
{standard input} Warning: end of file in string; inserted '"'
gcc: Internal error: Killed (program cc1)
Please submit a full bug report.
See <URL:http://bugs.gentoo.org/> for instructions.
make[4]: *** [drivers/isdn/hardware/eicon/message.o] Error 1
make[3]: *** [drivers/isdn/hardware/eicon] Error 2
make[2]: *** [drivers/isdn/hardware] Error 2
make[1]: *** [drivers/isdn] Error 2
--
LD [M] drivers/md/raid456.o
LD [M] drivers/md/dm-mod.o
LD [M] drivers/md/dm-multipath.o
LD [M] drivers/md/dm-snapshot.o
LD [M] drivers/md/dm-mirror.o
make: *** [drivers] Error 2
* Gentoo Linux Genkernel; Version 3.4.9
* Running with options: all

* ERROR: Failed to compile the "modules" target...

* -- End log... --

* Please consult /var/log/genkernel.log for more information and any
* errors that were reported above.

* Report any genkernel bugs to bugs.gentoo.org and
* assign your bug to genkernel@gentoo.org. Please include
* as much information as you can in your bug report; attaching
* /var/log/genkernel.log so that your issue can be dealt with effectively.
*
* Please do *not* report compilation failures as genkernel bugs!
*




vadi to ?

no ty krávo, jdu to přelouskat...

tak a nemám naprosto žádné ponětí, co se to stalo.
co když to zkusíš spustit (udělej si na to novou položku v grubu,kdyby se něco "náhodou" podělalo)

hehe pozde jsem mladej a blbej takze jsem smazal starej kernel ale s timhle to vklidku nabootovalo ovsem ta chyba se stiti zustala

tak to netuším

jedine me napada sosnout cely instalacni CD a pak ho tam nomalne dat...

ps:ale celkem me to depta ja zitra jedu do svycarska a prijedu v nedeli takze na to nebude cas.. a nebudu kvuli tomu spat

Tak neviem teda prečo ti to vyhadzuje tie errory.
Ale v každom prípade sem hoď ten lspci a najlepšie, keď na live cd kde ti sieť ide dáš lsmod a ten sem tiež skopíruješ a uvidíme ktorý modul používa sieťovka a potom ho bude stačiť naloadovať pomocou príkazu modprobe <modul>.

oukej du to nabootvat...

takze :


livecd ~ # lspci
00:00.0 Host bridge: Intel Corporation 440LX/EX - 82443LX/EX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440LX/EX - 82443LX/EX AGP bridge (rev 03)
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:10.0 Ethernet controller: VIA Technologies, Inc. VT6105 [Rhine-III] (rev 86)
01:00.0 VGA compatible controller: S3 Inc. Trio 64 3D (rev 01)






a


lsmod :


livecd ~ # lsmod
Module Size Used by
ipv6 170912 12
3w_9xxx 25604 0
via_rhine 14472 0
mii 3968 1 via_rhine
rtc 7476 0
tg3 88324 0
e1000 90432 0
nfs 85180 0
lockd 41352 1 nfs
sunrpc 99644 2 nfs,lockd
jfs 143340 0
dm_mirror 13008 0
dm_mod 31896 1 dm_mirror
pdc_adma 4868 0
sata_mv 11656 0
ata_piix 8072 0
ahci 11268 0
sata_qstor 4996 0
sata_vsc 4100 0
sata_uli 3204 0
sata_sis 3844 0
sata_sx4 8452 0
sata_nv 4740 0
sata_via 4868 0
sata_svw 3844 0
sata_sil24 8708 0
sata_sil 5384 0
sata_promise 6276 0
libata 61460 15 pdc_adma,sata_mv,ata_piix,ahci,sata_qstor,sata_vsc,sata_uli,sata_sis,sata_sx4,sata_nv,sata_via,sata_svw,sata_sil24,sata_sil,sata_promise
sbp2 15364 0
ohci1394 24880 0
ieee1394 53176 2 sbp2,ohci1394
sl811_hcd 8320 0
usbhid 29792 0
ohci_hcd 13572 0
uhci_hcd 15240 0
usb_storage 57280 0
ehci_hcd 19976 0
usbcore 78084 7 sl811_hcd,usbhid,ohci_hcd,uhci_hcd,usb_storage,ehci_hcd



*****:jak tak na to koukam tak to haze sitovku via coz je zvlastni pac je tam d-link ... ale tak funguje to **jako ze funguje to v live verzi ne normalne

Je to síce d-link ale dôležitý je čip a ten je zrejme via...
Super, takže všetko čo potrebuješ urobiť je zadať na tvojom systéme: A ak potom pôjde sieť tak ho treba pridať do:
/etc/modules
toto:
via_rhine
Aby sa načítaval automaticky pri štarte.

ok zkusim

tak jsem zkusil a nafackovalo mi to ze nezna via_rhine coz mi prislo divny tak jsem dal lspci a hle nafackovalo mi to... videl bych to na to ze bude problem o5 v tom jadre takze zkusim zkompilovat new kernel klasicky jak je to v tom navodu .... a pak to udelam....

ps:uz se to kompiluje

v tom kernelu nesmis zapomenout dat ten ovladac sitovky (via_rhine) jako modul/zakompilovat primo do jadra (a pak neni potreba modprobe).

Ja osobne jsem si Tulipa zakompiloval primo do jadra

mjo dneska sem prijel ze svajzu takze pak to nak zkusim ... diky