Stránka 1 z 2

Adrenalin SW 2020 Edition 20.3.1 (19.50.29.15) - 19.3.2020

Napsal: čtv 19. bře 2020, 14:46
od Krteq
Radeon Software Adrenalin 2020 Edition 20.3.1 Highlights

Support For

  • DOOM™ Eternal
    • Achieve up to 5% better performance playing Doom Eternal (Ultra Nightmare settings) at 1920x1080p on the Radeon™ RX 5700XT with Radeon™ Software Adrenalin 2020 Edition 20.3.1, versus Radeon™ Software Adrenalin 2020 Edition 20.2.2. RS-333
  • Half-Life™: Alyx
  • Ghost Recon™ Breakpoint
    • Vulkan® API
Added Vulkan® Support
  • VK_EXT_post_depth_coverage
    • This extension indicates support for shader modules that use the SPV_KHR_post_depth_coverage extension. Fragment shaders using the SPV extension can control whether the SampleMask built-in input variable reflects the coverage after the depth and stencil tests are applied. This extension is only supported on AMD RDNA hardware.
  • VK_KHR_shader_non_semantic_info
    • This extension indicates support for shader modules that use the SPV_KHR_non_semantic_info extension. Shader modules using the SPV extension can include non-semantic instructions that can be safely removed from the module.
  • VK_EXT_texel_buffer_alignment
    • This extension provides a mechanism to query alignment requirements for uniform and storage texel buffers that cannot be well communicated via minTexelBufferOffsetAlignment.
  • VK_EXT_pipeline_creation_cache_control
    • This extension provides flags that can be used by an application to inquire about potential high cost that could be incurred during pipeline creation. The information can be obtained prior to carrying out the create operation, which would allow the application to adjust its behavior accordingly.
Fixed Issues
  • Frame skipping or choppy audio may be experienced in videos captured using Radeon ReLive.
  • Some games may experience stutter while using Instant Replay or third-party applications that stream or perform screen capture.
  • Hotkeys may fail to apply to scenes in ReLive scene editor when the scene has a custom name.
  • Webcam elements may fail to appear on screen when a custom location is set during ReLive recording.
  • AMD A-Series/E-Series APU Processors will reflect older Radeon Software Adrenalin 2019 Edition Settings user interface.
  • Zero RPM toggle may fail to reset or appear when disabling advanced fan tuning options in Performance Tuning.
  • Radeon Software may automatically close when a live stream is started or stopped.
  • Desktop cursor may intermittently remain visible after toggling Radeon Software’s overlay in some games.
  • Red Dead Redemption 2™ may experience a blank screen when launched using the Vulkan® API.
  • Radeon Software may experience an application crash, or a system TDR may occur, when VRAM reaches 8GB or more with HBCC enabled on Radeon RX Vega series graphics products.
  • DOOM™ may experience an intermittent system hang or application crash during gameplay.
  • Space Engineers™ may experience an application or hang during gameplay when Grass Density is turned on.
  • A system hang or black screen may occur when exiting SteamVR™ with multi display system configurations.
  • Monster Hunter World™: Iceborne may have lower than expected performance in some areas of the game on Radeon RX 5700 series graphics products.
  • Video playback may exhibit corruption on Interlaced content in Movies and TV on Ryzen 3000 with Radeon Graphics Processors.
  • PassMark™ may experience an application hang on some Ryzen with Radeon Graphics Processors.
  • On Radeon RX Vega and older discrete GPUs and on APUs, enabling integer display scaling could result in a reduction of frame rate.
  • Integer display scaling may not show up as available in Radeon Software on some GCN-based GPUs.
Known Issues
  • Enhanced Sync may cause a black screen to occur when enabled on some games and system configurations. Any users who may be experiencing issues with Enhanced Sync enabled should disable it as a temporary workaround.
  • Performance Metrics Overlay and Radeon WattMan incorrectly report higher than expected idle clock speeds on Radeon RX 5700 series graphics products. Performance and power consumption are not impacted by this incorrect reporting.
  • Radeon Software may open with an inconsistent window size or may not keep its previously set size when opened.
  • Modifying the HDMI Scaling slider may cause FPS to become locked to 30.
  • Some games may exhibit stutter intermittently during gameplay on Radeon RX 5000 series graphics products.
  • Desktop or In-game corruption may occur intermittently when HDR is enabled.
  • Radeon RX Vega series graphics products may experience a system crash or TDR when playing games with Instant Replay enabled. A workaround for users experiencing these issues is to disable Instant Replay.
  • A system crash or hang may be experienced when using Edge browser to play Netflix™ content.
  • Some users may still experience black screen or system hang issues during extended periods of gameplay. AMD will continue to monitor and investigate reports of these issues closely.
:arrow: Download a kompletní release notes: Radeon™ Software Adrenalin 2020 Edition 20.3.1 Release Notes

Re: Adrenalin SW 2020 Edition 20.3.1 (19.50.29.15) - 19.3.20

Napsal: čtv 19. bře 2020, 16:33
od HEAD
V idle porad 800mhz.Kdyz vypnu zero RPM, tak minimalne to toci silenych 1100rpm :x a pokud necham zero rpm, tak pameti dosahujou az 70°C v idle. :angry2:

Re: Adrenalin SW 2020 Edition 20.3.1 (19.50.29.15) - 19.3.20

Napsal: čtv 19. bře 2020, 16:36
od Krteq
Těch 800MHz je ale false reading - přečti si pořádně release notes.

Re: Adrenalin SW 2020 Edition 20.3.1 (19.50.29.15) - 19.3.20

Napsal: čtv 19. bře 2020, 17:38
od webwalker
Tak to mohu potvrdit přesným měřením:
powertracker-rsae.Png
Rozdíl 0,1 W (celá VGA)

Jinak na ASUS TUF3 je teplota VRAM 36°C při idle fan 980RPM.

Re: Adrenalin SW 2020 Edition 20.3.1 (19.50.29.15) - 19.3.20

Napsal: čtv 19. bře 2020, 18:16
od havli
On ma tusim monitor s vysokym refreshem a tam se to muze chovat jinak.

Re: Adrenalin SW 2020 Edition 20.3.1 (19.50.29.15) - 19.3.20

Napsal: čtv 19. bře 2020, 18:24
od Krteq
Nope, nechová.

A myslím že webwalker jede taky na 144(+)Hz monitoru.

Re: Adrenalin SW 2020 Edition 20.3.1 (19.50.29.15) - 19.3.20

Napsal: čtv 19. bře 2020, 18:29
od HEAD
havli píše:On ma tusim monitor s vysokym refreshem a tam se to muze chovat jinak.
Jo ja mam 165hz monitor.Vram jedou celou dobu na max.Jinak 1100rpm silene rve a radsi budu provozovat pameti na 70°C nez poslouchat ten randal v idle.

Re: Adrenalin SW 2020 Edition 20.3.1 (19.50.29.15) - 19.3.20

Napsal: čtv 19. bře 2020, 18:57
od havli
To je holt tak kdyz delas dobrovolne downgrade grafiky. :razz:

Re: Adrenalin SW 2020 Edition 20.3.1 (19.50.29.15) - 19.3.20

Napsal: čtv 16. dub 2020, 22:34
od killerek
Tak sem z nudy prochazel to nove GUI a ten performance advisor je vtipny. Od instalace před týdnem sem zkousel dve hry, ale pro HotS nemá cenu delat profil, protože s kazdym patchem hry se rozbije (Blizz je picus a stehuje exac pokazde do noveho adresare s jinym nazvem).

Zpatky k advisoru. Zkousel sem po patchích Wolcen. Nastaveny profil s limitem na 60 FPS min i max. Během posledni herni session (72 minut) to zaznamenalo prumerne FPS 59.8 a frametime 17 ms, presto mi to da nejhorsi znamku a doporucuje snižovat nastaveni.

Zkuste se schvalne take mrknout, co vam tu hranych her hlasi a jestli je to teda pro BFU vůbec k necemu.

Jo a tady ma k tomu AMD popis:
https://www.amd.com/en/support/kb/faq/dh2-028

Re: Adrenalin SW 2020 Edition 20.3.1 (19.50.29.15) - 19.3.20

Napsal: sob 18. dub 2020, 10:13
od HEAD
Hral jsem 4 hodiny fallout76 a ukazuje to avg 141fps a taky to doporucuje snizit detaily :lol:Chill mam nastavenej na min 162 a max 163fps

Re: Adrenalin SW 2020 Edition 20.3.1 (19.50.29.15) - 19.3.20

Napsal: sob 18. dub 2020, 10:19
od Krteq
HEAD píše:Chill mam nastavenej na min 162 a max 163fps
:? Na 165Hz monitoru? Proč? Asi jsi nepochopil k čemu Chill je :lol:

Re: Adrenalin SW 2020 Edition 20.3.1 (19.50.29.15) - 19.3.20

Napsal: sob 18. dub 2020, 10:25
od HEAD
Pac mam 165hz monitor a realne je to 164hz(164hz ukazujou win) a freesync ma 48-164hz a kdyz mam nastaveno 162-163, tak jsem cca 1fps pod max freesync resfresh rate.

Re: Adrenalin SW 2020 Edition 20.3.1 (19.50.29.15) - 19.3.20

Napsal: sob 18. dub 2020, 10:32
od Krteq
A ty ve F76 dosahuješ 163 FPS?

Re: Adrenalin SW 2020 Edition 20.3.1 (19.50.29.15) - 19.3.20

Napsal: sob 18. dub 2020, 10:55
od HEAD
Tak pri 141 avg fps je jasny ze jo.

Re: Adrenalin SW 2020 Edition 20.3.1 (19.50.29.15) - 19.3.20

Napsal: sob 18. dub 2020, 11:16
od Krteq
V tom případě stále nechápu použití Chill... Aby jsi se zbavil tearingu nad FreeSync range použij V-Sync.

Re: Adrenalin SW 2020 Edition 20.3.1 (19.50.29.15) - 19.3.20

Napsal: sob 18. dub 2020, 11:45
od HEAD
AMD a vynucovani Vsyncu nefunguje.Navic ve fallout76 jsem musel vsync vypnout pac jsem mel 10fps.
Chill je proste fps lock.Mam to nastaveny na 163fps a funguje to skoro vsude.

Re: Adrenalin SW 2020 Edition 20.3.1 (19.50.29.15) - 19.3.20

Napsal: sob 18. dub 2020, 11:50
od Krteq
Vynucený V-Sync normálně funguje

Re: Adrenalin SW 2020 Edition 20.3.1 (19.50.29.15) - 19.3.20

Napsal: sob 18. dub 2020, 11:57
od HEAD
:lol: Jo jasne.Schvalne jsem zapnul unigine heaven s V-sync on a samozrejme to nefunguje.
Btw co tak ctu, tak chill zvysuje input lag.Takze misto nej budu pouzivat RTSS.
Edit stalker SOC(+datastor) vsync taky nefunguje.Nefunguje dokonce ani vynuceni ve hre.

Re: Adrenalin SW 2020 Edition 20.3.1 (19.50.29.15) - 19.3.20

Napsal: sob 18. dub 2020, 18:09
od Srandista
A kedy že si to naposledy reinštaloval ten svoj Windows?

Re: Adrenalin SW 2020 Edition 20.3.1 (19.50.29.15) - 19.3.20

Napsal: ned 19. dub 2020, 03:40
od spajdr
Globalne zapnuty Vsync pres RSX (Radeon Software) s Unigine Heaven opravdu nejde.
Ale kdyz si behem benche das pres Esc klavesu nastaveni a zakliknes Vsync, tak to pojede.

Co se tyce Fallout 76 tak zapnuty Vsync na 75Hz mi zaden problem nedela, fps se drzi na tech 75.