PCTuning fórum

Diskuze o hardware, software a overclockingu
https://forum.pctuning.cz/

Flashdisk - Vyřešeno

https://forum.pctuning.cz/viewtopic.php?t=40244

Stránka 1 z 1

Flashdisk - Vyřešeno

Napsal: stř 6. črc 2005, 13:06
od eraser
mám problém s flashdiskem nejde mi vůbec přimountovat
lsusb

Kód: Vybrat vše

Bus 001 Device 003: ID 0c76:0005 JMTek, LLC. USBdisk
jinak v jádře podpora pro usb mass storage , scsi podpora , moduly : hotplug, coldplug , gentoo distribuce

no a když pak dám :
mount -t vfat /dev/sda1 /mnt/usbstick
tak
mount: /dev/sda1 není platným blokovým zařízením

čerpal sem z http://forums.gentoo.org/viewtopic-t-53 ... art-0.html

ještě dodám cat /proc/bus/usb/devices

Kód: Vybrat vše

T:  Bus=01 Lev=01 Prnt=01 Port=08 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0c76 ProdID=0005 Rev= 1.00
S:  Manufacturer=Kingston
S:  Product=DataTraveler 2.0
S:  SerialNumber=26F0D540C0621BC8
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=31875us
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=64ms
a dmesg:

Kód: Vybrat vše

usb 1-9: new high speed USB device using ehci_hcd and address 4
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
  Vendor: Kingston  Model: DataTraveler 2.0  Rev: 4.10
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0,  type 0
usb-storage: device scan complete
usb 1-9: USB disconnect, address 4
usb 1-9: new high speed USB device using ehci_hcd and address 5
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
  Vendor: Kingston  Model: DataTraveler 2.0  Rev: 4.10
  Type:   Direct-Access                      ANSI SCSI revision: 02
zkoušel sem mountovad to sg0 taky to samý a to scsi1 neexistuje :-(

Napsal: stř 6. črc 2005, 13:30
od TomV
Strč tam flashdisk a hned potom mrkni do logu, kam ti ho jádro přiřadilo. Nemusí to být vždycky sda1...

Napsal: stř 6. črc 2005, 14:19
od eraser
tak log je celkem dlouhej doufám , že se z toho něco vyčte

Kód: Vybrat vše

Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Command INQUIRY (6 bytes)
Jul  6 14:15:57 erda usb-storage:  12 00 00 00 24 00
Jul  6 14:15:57 erda usb-storage: Bulk Command S 0x43425355 T 0x20 L 36 F 128 Trg 0 LUN 0 CL 6
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 31/31
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk command transfer result=0
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 36/36
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk data transfer result 0x0
Jul  6 14:15:57 erda usb-storage: Attempting to get CSW...
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 13/13
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk status result = 0
Jul  6 14:15:57 erda usb-storage: Bulk Status S 0x53425355 T 0x20 R 0 Stat 0x0
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x0
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda Vendor: Kingston  Model: DataTraveler 2.0  Rev: 4.10
Jul  6 14:15:57 erda Type:   Direct-Access                      ANSI SCSI revision: 02
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Command TEST_UNIT_READY (6 bytes)
Jul  6 14:15:57 erda usb-storage:  00 00 00 00 00 00
Jul  6 14:15:57 erda usb-storage: Bulk Command S 0x43425355 T 0x21 L 0 F 0 Trg 0 LUN 0 CL 6
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 31/31
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk command transfer result=0
Jul  6 14:15:57 erda usb-storage: Attempting to get CSW...
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 13/13
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk status result = 0
Jul  6 14:15:57 erda usb-storage: Bulk Status S 0x53425355 T 0x21 R 0 Stat 0x1
Jul  6 14:15:57 erda usb-storage: -- transport indicates command failure
Jul  6 14:15:57 erda usb-storage: Issuing auto-REQUEST_SENSE
Jul  6 14:15:57 erda usb-storage: Bulk Command S 0x43425355 T 0x80000021 L 18 F 128 Trg 0 LUN 0 CL 6
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 31/31
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk command transfer result=0
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 18/18
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk data transfer result 0x0
Jul  6 14:15:57 erda usb-storage: Attempting to get CSW...
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 13/13
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk status result = 0
Jul  6 14:15:57 erda usb-storage: Bulk Status S 0x53425355 T 0x80000021 R 0 Stat 0x0
Jul  6 14:15:57 erda usb-storage: -- Result from auto-sense is 0
Jul  6 14:15:57 erda usb-storage: -- code: 0xf0, key: 0x6, ASC: 0x28, ASCQ: 0x0
Jul  6 14:15:57 erda usb-storage: (Unknown Key): (unknown ASC/ASCQ)
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x2
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Command TEST_UNIT_READY (6 bytes)
Jul  6 14:15:57 erda usb-storage:  00 00 00 00 00 00
Jul  6 14:15:57 erda usb-storage: Bulk Command S 0x43425355 T 0x22 L 0 F 0 Trg 0 LUN 0 CL 6
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 31/31
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk command transfer result=0
Jul  6 14:15:57 erda usb-storage: Attempting to get CSW...
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 13/13
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk status result = 0
Jul  6 14:15:57 erda usb-storage: Bulk Status S 0x53425355 T 0x22 R 0 Stat 0x0
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x0
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Command READ_CAPACITY (10 bytes)
Jul  6 14:15:57 erda usb-storage:  25 00 00 00 00 00 00 00 00 00
Jul  6 14:15:57 erda usb-storage: Bulk Command S 0x43425355 T 0x23 L 8 F 128 Trg 0 LUN 0 CL 10
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 31/31
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk command transfer result=0
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 8/8
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk data transfer result 0x0
Jul  6 14:15:57 erda usb-storage: Attempting to get CSW...
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 13/13
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk status result = 0
Jul  6 14:15:57 erda usb-storage: Bulk Status S 0x53425355 T 0x23 R 0 Stat 0x0
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x0
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda SCSI device sda: 503808 512-byte hdwr sectors (258 MB)
Jul  6 14:15:57 erda sda: assuming Write Enabled
Jul  6 14:15:57 erda sda: assuming drive cache: write through
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Command TEST_UNIT_READY (6 bytes)
Jul  6 14:15:57 erda usb-storage:  00 00 00 00 00 00
Jul  6 14:15:57 erda usb-storage: Bulk Command S 0x43425355 T 0x24 L 0 F 0 Trg 0 LUN 0 CL 6
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 31/31
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk command transfer result=0
Jul  6 14:15:57 erda usb-storage: Attempting to get CSW...
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 13/13
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk status result = 0
Jul  6 14:15:57 erda usb-storage: Bulk Status S 0x53425355 T 0x24 R 0 Stat 0x0
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x0
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
Jul  6 14:15:57 erda usb-storage:  1e 00 00 00 01 00
Jul  6 14:15:57 erda usb-storage: Bulk Command S 0x43425355 T 0x25 L 0 F 0 Trg 0 LUN 0 CL 6
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 31/31
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk command transfer result=0
Jul  6 14:15:57 erda usb-storage: Attempting to get CSW...
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 13/13
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk status result = 0
Jul  6 14:15:57 erda usb-storage: Bulk Status S 0x53425355 T 0x25 R 0 Stat 0x1
Jul  6 14:15:57 erda usb-storage: -- transport indicates command failure
Jul  6 14:15:57 erda usb-storage: Issuing auto-REQUEST_SENSE
Jul  6 14:15:57 erda usb-storage: Bulk Command S 0x43425355 T 0x80000025 L 18 F 128 Trg 0 LUN 0 CL 6
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 31/31
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk command transfer result=0
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 18/18
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk data transfer result 0x0
Jul  6 14:15:57 erda usb-storage: Attempting to get CSW...
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 13/13
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk status result = 0
Jul  6 14:15:57 erda usb-storage: Bulk Status S 0x53425355 T 0x80000025 R 0 Stat 0x0
Jul  6 14:15:57 erda usb-storage: -- Result from auto-sense is 0
Jul  6 14:15:57 erda usb-storage: -- code: 0xf0, key: 0x5, ASC: 0x20, ASCQ: 0x0
Jul  6 14:15:57 erda usb-storage: (Unknown Key): (unknown ASC/ASCQ)
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x2
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Command TEST_UNIT_READY (6 bytes)
Jul  6 14:15:57 erda usb-storage:  00 00 00 00 00 00
Jul  6 14:15:57 erda usb-storage: Bulk Command S 0x43425355 T 0x26 L 0 F 0 Trg 0 LUN 0 CL 6
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 31/31
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk command transfer result=0
Jul  6 14:15:57 erda usb-storage: Attempting to get CSW...
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 13/13
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk status result = 0
Jul  6 14:15:57 erda usb-storage: Bulk Status S 0x53425355 T 0x26 R 0 Stat 0x0
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x0
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Command READ_CAPACITY (10 bytes)
Jul  6 14:15:57 erda usb-storage:  25 00 00 00 00 00 00 00 00 00
Jul  6 14:15:57 erda usb-storage: Bulk Command S 0x43425355 T 0x27 L 8 F 128 Trg 0 LUN 0 CL 10
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 31/31
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk command transfer result=0
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 8/8
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk data transfer result 0x0
Jul  6 14:15:57 erda usb-storage: Attempting to get CSW...
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 13/13
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk status result = 0
Jul  6 14:15:57 erda usb-storage: Bulk Status S 0x53425355 T 0x27 R 0 Stat 0x0
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x0
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda SCSI device sda: 503808 512-byte hdwr sectors (258 MB)
Jul  6 14:15:57 erda sda: assuming Write Enabled
Jul  6 14:15:57 erda sda: assuming drive cache: write through
Jul  6 14:15:57 erda sda:<7>usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Command READ_10 (10 bytes)
Jul  6 14:15:57 erda usb-storage:  28 00 00 00 00 00 00 00 08 00
Jul  6 14:15:57 erda usb-storage: Bulk Command S 0x43425355 T 0x28 L 4096 F 128 Trg 0 LUN 0 CL 10
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 31/31
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk command transfer result=0
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 4096/4096
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk data transfer result 0x0
Jul  6 14:15:57 erda usb-storage: Attempting to get CSW...
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 13/13
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk status result = 0
Jul  6 14:15:57 erda usb-storage: Bulk Status S 0x53425355 T 0x28 R 0 Stat 0x0
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x0
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda sda1
Jul  6 14:15:57 erda Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
Jul  6 14:15:57 erda Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0,  type 0
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Bad target number (1:0)
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x40000
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Bad target number (2:0)
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x40000
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Bad target number (3:0)
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x40000
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Bad target number (4:0)
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x40000
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Bad target number (5:0)
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x40000
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Bad target number (6:0)
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x40000
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Bad target number (7:0)
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x40000
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda usb-storage: device scan complete
Jul  6 14:15:57 erda scsi.agent[8174]: disk at /devices/pci0000:00/0000:00:02.1/usb1/1-9/1-9:1.0/host2/target2:0:0/2:0:0:0
ještě možná :

Kód: Vybrat vše

Jul  6 14:23:46 erda usb 1-9: new high speed USB device using ehci_hcd and address 6
Jul  6 14:23:46 erda usb-storage: USB Mass Storage device detected
Jul  6 14:23:46 erda usb-storage: -- associate_dev
Jul  6 14:23:46 erda usb-storage: Vendor: 0x0c76, Product: 0x0005, Revision: 0x0100
Jul  6 14:23:46 erda usb-storage: Interface Subclass: 0x06, Protocol: 0x50
Jul  6 14:23:46 erda usb-storage: Vendor: Kingston,  Product: DataTraveler 2.0
Jul  6 14:23:46 erda usb-storage: Transport: Bulk
Jul  6 14:23:46 erda usb-storage: Protocol: Transparent SCSI
Jul  6 14:23:46 erda usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
Jul  6 14:23:46 erda usb-storage: GetMaxLUN command result is 1, data is 0
Jul  6 14:23:46 erda scsi3 : SCSI emulation for USB Mass Storage devices
Jul  6 14:23:46 erda usb-storage: *** thread sleeping.
Jul  6 14:23:46 erda usb-storage: device found at 6
Jul  6 14:23:46 erda usb-storage: waiting for device to settle before scanning
Jul  6 14:23:48 erda syslog-ng[6230]: STATS: dropped 0
Jul  6 14:23:50 erda hub 2-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
Jul  6 14:23:50 erda usb 2-3: USB disconnect, address 6
to se stalo ještě před tamtim ( i když časově to je naopak )

Napsal: stř 6. črc 2005, 14:55
od eraser
:oops: ten linux je kouzelnej

Kód: Vybrat vše

erda root # mount -t vfat /dev/sda1 /mnt/kingston/
erda root # ls /mnt/kingston/
amp
readme.txt
Re.doc
-=[SKOLA]=-
smb.conf.txt
VooDoo
Within Temptation - Mother Earth (Knights Of The Temple Remix).wmv
fakt netučím že to najednou začalo fachat

Napsal: pát 19. srp 2005, 21:43
od [CZ]Al@n
cus..já mam taky problém s flashdiskem..když ho připojim a chci ho otevřít tak se mi hodí hláška jestli ho chci naformátovat a když nechci tak se neotevře a když ho chci teda naformátovat tak to nejde :sad: neporadí mi někdo co s tim??

Napsal: sob 20. srp 2005, 11:27
od eraser
a máš v kernelu zaplou podporu FAT32 , v případě že máš ten fat32 i natom usb sticku

//EDIT
já mám NTFS....
ale to je ti na 2 věci , musíš mít zapnutou v kernelu podporu pro fat32 (vfat) !!!!!!

Napsal: ned 21. srp 2005, 08:05
od [CZ]Al@n
já mam NTFS a na tom USB disku vubec nevim co je ale když to chce formátopvat tak jedině ve formátu FAT32.

Gentoo "IT WORKS" howto :)

Napsal: čtv 25. srp 2005, 10:49
od trancelis
Ujisti se, že v jádře máš podporu USB, USB Mass Storage, FAT a _hlavně_ modul s NLS pro vfat (stačí mít iso-8859-2, 8859-1, us-ascii a cp1250). pak emergni "ivman" a nahoď ho: /etc/init.d/ivman start. Tím se rozjede HAL mounter a všecko ti bude mountovat do /media, třeba foťáky, flashky, ipody... prostě dokonalý :o)

Napsal: čtv 25. srp 2005, 10:58
od TomV
[CZ]Al@n píše:já mam NTFS a na tom USB disku vubec nevim co je ale když to chce formátopvat tak jedině ve formátu FAT32.
Na USB flashdiscích bývá právě většinou FAT32, na těch malých pak FAT16...
Všechny časy jsou v UTC+02:00
Stránka 1 z 1

Založeno na phpBB® Forum Software © phpBB Limited

Český překlad – phpBB.cz