Stránka 1 z 2

Catalyst 6.12

Napsal: stř 13. pro 2006, 22:47
od no-X
Zatím se nezdají být něčím výjimečné - ale začínají řešit problémy s akcelerací videa, což je pozitivní.

Catalyst 6.12

Release Notes

New Features
This release of the ATI Catalyst™ software suite introduces DirectX video acceleration for CrossFire™ enabled configurations.

Issues Resolved in Catalyst® Software Suite 6.12
The following section provides a summary of the issues that are resolved in the latest release of Catalyst®. These include:

Black&White 2: Slow frame rate is no longer noticed when playing the game under Windows XP when setting the graphics to the lowest possible settings. Further details can be found in topic number 737-23714
Neverwinter Nights: Enabling super AA and CrossFire within the Catalyst Control Center no longer results in display corruption being noticed within the game's main menu. Further details can be found in topic number 737-23718
Catalyst® Control Center->CrossFire™: Attempting to resume from a standby state no longer results in the Windows XP operating system failing to respond when using a Radeon® X19x0 CrossFire™ Edition series of product. Further details can be found in topic number 737-23713
Catalyst Control Center: Setting the language option to French for the Catalyst Control Center no longer results in the text found in Catalyst Control Center being cropped. This issue was known to occur under all supported operating system. Further details can be found in topic number 737-23716
Using PowerDVD to playback a DVD no longer results in the playback appearing choppy. Further details can be found in topic number 737-23719
Catalyst Control Center: The translation for Centered Timings is now translated properly for Simplified Chinese. Further details can be found in topic number 737-24337
The index in the Catalyst Control Center help no longer contains double entries for various aspects. Further details can be found in topic number 737-24338
Catalyst Control Center->Help: Clicking on the CrossFire help no longer results in a page not found error message being displayed. Further details can be found in topic number 737-24339
Using the Avivo Video Converter to convert a video file no longer exceeds the 300MB for a VCD encoded file. Further details can be found in topic number 737-24340
Catalyst Control Center->Help: Clicking on certain help file links no longer results in the incorrect help file being displayed. Further details can be found in topic number 737-24341
Catalyst Control Center: The Profile Manager is now translated properly for Italian. Further details can be found in topic number 737-24342
Catalyst Control Center: Various options such as Select a Language and Deinterlacing for the Thai language are now translated properly. Further details can be found in topic number 737-24343
Changing the language to Korean in the Catalyst Control Center no longer results in the degree symbol appearing corrupted within the rotation page. Further details can be found in topic number 737-24344
Catalyst Control Center->Basic View: Selecting Japanese as the language no longer results in various aspects of the Easy Setting Wizard and Setup Display Settings not being translated properly. Further details can be found in topic number 737-24345
Using hotkeys to switch between LCD mode and CRT+LCD mode no longer results in the hotkey function failing when attempting to switch back to LCD mode only. Further details can be found in topic number 737-24288
Using PowerDVD to playback a DVD no longer results in the playback appearing jittery. Further details can be found in topic number 737-23719
CrossFire: Playing Windows XP games such as Labyrinth or HyperBowl no longer results in display corruption being noticed in the game's menu page. Further details can be found in topic number 737-24335
Hardware acceleration no longer becomes disabled when running the HQV benchmark DVD with CrossFire enabled. Further details can be found in topic number 737-24336

Napsal: pon 18. pro 2006, 15:08
od Coololooser
ATI Catalyst 6.12 Performance Analysis - Final for 2006
za zminku asi stoji vyrazne navyseni vykonu v CoH

Napsal: čtv 21. pro 2006, 21:15
od Oneeye_IO
cool.user píše:ATI Catalyst 6.12 Performance Analysis - Final for 2006
za zminku asi stoji vyrazne navyseni vykonu v CoH
Zkoušel jsem a o něco lepší to je, že by to byl ale nějakej zázrak se říct nedá. Spíš tolik nekolísá fps a celkový nárust u mě byl asi tak 5 fps max. Lepší něco než nic :-).

help

Napsal: čtv 21. pro 2006, 22:03
od FGW17
Nazdar.
Prosim poradte, ja som to hladal ale newiem to stiahnut, please poraddte kde to najdem.
Tento ovladac, neviem najst download na tej stranke
ATI Catalyst 6.12 Performance Analysis - Final for 2006

Napsal: čtv 21. pro 2006, 22:05
od kupco
V prvom no-X-ovom poste mas link...

Help

Napsal: čtv 21. pro 2006, 22:32
od FGW17
Sory ale este vzdy som to nenasiel, som off z takychto stranok, ak ta mozem poprosit hodis mi link ?
Dakuje

Re: Help

Napsal: čtv 21. pro 2006, 22:36
od Pawlis
FGW17 píše:Sory ale este vzdy som to nenasiel, som off z takychto stranok, ak ta mozem poprosit hodis mi link ?
Dakuje
http://ati.amd.com/support/drivers/xp/radeonx-xp.html

Pawlis

Napsal: čtv 21. pro 2006, 22:40
od FGW17
To je presne ten isty co je na tej stranke ?
Inak Diky moc za Link Pawlis
Idem to testnut
Diky

Napsal: čtv 21. pro 2006, 23:53
od l0k2
Neviem ci to mozem spomenut v tejto sekcii, ale snad ma nikto nezabije. V podstate si uz neviem rady, vymenil som chladic na x1950ke, vsetko slo pekne. Odinstaloval som stare ovladace pomocou utility a chcel nainstalovat nove (6.12 x64). Zakazdym skoncim instalaciu s hlaskou

Obrázek

Prve som myslel ze to moze mat spojitost s chladicom, ale na inom pc to funguje ako ma (sice x86). Nieco podobne sa mi raz uz stalo, ale s chipsetom, nevedel si nacitat subory z .cab. Tuto sa tieto cab. subory nedaju ani otvorit (skusane aj na starsich ver). Aby toho nebolo dost, nefunguju ani starsie ovladace (6.9, 6.10, 6.11..). Zo zufalstva ma uz napada ci to nemoze mat spojitost na framework, ktory je tiez potrebny pri instalacii CCC. Dalsia zvlastnost je ze po starte sa karta v "device manager" tvari ako disabled, preciarknuta na cerveno. Prosim ak ma niekto rozumnu radu, poradte.

Napsal: pát 22. pro 2006, 00:35
od raptor
A ty používáš 64x Windows, že si pro ně stahuješ ovladače? Pokud ne, tak si stáhni ovladače pro normální WinXP.

Napsal: pát 22. pro 2006, 00:39
od Coololooser
raptor píše:A ty máš 64x Windows, že si pro ně stahuješ ovladače?
Se podivej na jeho podpis ne? :roll:

jinak co takhle obnoveni systemu z data pred updatem ovladacu? :?
edit: neni me jasna jedna vec proc si reinstaloval ovladace pri vymene chladice.... :?

Napsal: pát 22. pro 2006, 00:43
od raptor
cool.user píše:
raptor píše:A ty máš 64x Windows, že si pro ně stahuješ ovladače?
Se podivej na jeho podpis ne? :roll:

jinak co takhle obnoveni systemu z data pred updatem ovladacu? :?
edit: neni me jasna jedna vec proc si reinstaloval ovladace pri vymene chladice.... :?
Aha, to mi nějak uniklo. On přece psal, že měnil ovladače nové za staré, takže to nebylo kvůli chladiči. :D

Napsal: pát 22. pro 2006, 10:33
od l0k2
To ma napadlo, ci to nekontroluje pripojeny ventilator, alebo proste chladic celkovo, lebo ten novy je ext. napajany. Ale to uz bolo iba ciste zufalstvo :( Karta samozrejme ide nainstalovat na klasickom XP. Ovladace som menil, lebo som tam mal 6.11, tak som chcel upgrade. Odinstaloval stare a siel instalovat nove a uz som sa nepohol. Vcera som stiahol aj klasicke x32, tiez neslo. V podstate som uz zmiereny, ze hodim image niekedy z novembra. Len by som chcel mat istotu, ze ked ich zacnem znovu instalovat, ci sa nestane nieco podobne.

Obecné vyjádření

Napsal: pát 22. pro 2006, 10:52
od MrQuick
Myslím, že nové ovladače lze doporučit. Po instalaci mi 3DMark05 hodil o 600 bodů víc, což je skoro 8% nárůst, a to se vyplatí.

Napsal: pát 22. pro 2006, 11:32
od Wuuduu
btw. oficialne 6.12 mi na x64 Windowse a X1950Pro od Gigabyte idu naprosto normalne, takze v nich chyba nie je.

Napsal: pát 22. pro 2006, 11:57
od Sentenced
Oneeye_IO píše:
cool.user píše:ATI Catalyst 6.12 Performance Analysis - Final for 2006
za zminku asi stoji vyrazne navyseni vykonu v CoH
Zkoušel jsem a o něco lepší to je, že by to byl ale nějakej zázrak se říct nedá. Spíš tolik nekolísá fps a celkový nárust u mě byl asi tak 5 fps max. Lepší něco než nic :-).
Záleží na grafice, na řade X1900 to v CoH dela opravdu celkem zázraky :)

Napsal: pát 22. pro 2006, 13:08
od Oneeye_IO
Sentenced píše:
Oneeye_IO píše: Zkoušel jsem a o něco lepší to je, že by to byl ale nějakej zázrak se říct nedá. Spíš tolik nekolísá fps a celkový nárust u mě byl asi tak 5 fps max. Lepší něco než nic :-).
Záleží na grafice, na řade X1900 to v CoH dela opravdu celkem zázraky :)
Tak já mám x1600pro a hraju to na high skoro u všeho, akorát detaily stromů a stíny mám na low a terén na medium. Bez AA a AF.

Napsal: pát 22. pro 2006, 13:23
od l0k2
Samozrejme ovladacom vinu nepripisujem, aj napriek tomu ze mam x64. Stale si myslim ze to bude mat spolocne nieco s tymi cab subormi. Podla hlasky podla mne nedokonci korektne instalaciu, lebo nenainstaluje vsetky subory ktore su potrebne pre spravnu instalaciu.

Uz som si znovu pre"image"oval comp, nepouzil ati uninstall utilitu, ale rucne odinstaloval CCC a cez device manager ovladace. Po restarte si vypytal nove, zadal cestu a pekne sa to rozbehlo. Tazko povedat ci to mozem zvalit na ati uninst.. lebo doteraz som s nou nemal nikdy problem :?:

Napsal: stř 27. pro 2006, 02:03
od Fousek
No nevim jak CoH ty jsem predtim nehral ale v 3Dmarks mi spadl vykon z 5100 na 3800. :(

P.S:3Dmarks nehraju ale rozdil je to poradny

Napsal: stř 27. pro 2006, 15:01
od no-X
Nezapnul sis v-sync, fsaa, nebo něco takovýho? Protože se podle všeho žádný propady ve 3DMarku nekonají...

http://www.tweaktown.com/articles/1019/3