PCTuning fórum

ATI Catalyst 7.2 Performance Analysis (Windows XP)


New Features

Catalyst™ 7.2 introduces a brand new version of the Catalyst™ Control Center for Windows XP. The new Catalyst™ Control Center delivers a number of significant enhancements:

* Significant performance gains; Catalyst™ Control Center start-up time has been substantially reduced, and overall responsiveness has improved.
* Reduced system resource usage
* New 3D preview which significantly improves the ability for users to understand the benefits of enabling the many Catalyst™ features of their ATI Radeon™ graphics accelerator
* Increased stability
* Native 32 and 64-bit support


Resolved Issues for the Windows XP Operating System

* Battlefield 2: Attempting to launch the game under Windows XP with the in-game display setting at 1920x1440 or 2048x1536 and AA set to 6x no longer results in the game failing to launch. Further details can be found in topic number 737-22817
* Desperados 2: The game no longer fails to play and display an error in atioglxx.dll when AA is enabled. Further details can be found in topic number 737-25109
* Splinter Cell Double Agent: Corruption is no longer noticed when playing the game with AA enabled. Further details can be found in topic number 737-25104
* Catalyst™ Control Center->Basic View: Connecting a secondary display device and attempting to enable it, no longer results in the inability to enable the device when using Basic view. Further details can be found in topic number 737-23447
* Connecting a CRT as the primary display device and CV as the secondary display device no longer results in the desktop area and refresh rate being reported incorrectly when applying the 1080i30 Optimized mode within the Catalyst™ Control Center. Further details can be found in topic number 737-25174
* Enabling CrossFire™ no longer results in display corruption being noticed when playing certain 3D games such as Tiger Woods PGA Tour 2006 and Madden Football. Further details can be found in topic number 737-23006
* Catalyst™ Control Center->Basic View: Connecting a secondary display device and attempting to enable it, no longer results in the inability to enable the device when using Basic view. Further details can be found in topic number 737-24347
* Catalyst™ Control Center: Connecting an HDTV or DFP display device no longer results in some of the HDTV formats being listed twice in the Catalyst™ Control Center->Digital Panel Properties->HDTV Support. Further details can be found in topic number 737-24349
* A blank display no longer occurs when switching the display mode from 1920x1200 60Hz to 1600x1200 60Hz. Further details can be found in topic number 737-25811
* The display mode of 1080p is no longer added to mode list and customized list on HDTV where the maximum display mode is 1080i. Further details can be found in topic number 737-25812

narust vykonu

25% v DOOM3, o 48% v Quake 4 a o 21% v Prey

Stratos píše:narust vykonu

25% v DOOM3, o 48% v Quake 4 a o 21% v Prey

To platí jen pro OS Vista.

AXB píše:

Stratos píše:narust vykonu

25% v DOOM3, o 48% v Quake 4 a o 21% v Prey

To platí jen pro OS Vista.

tak co to dělá v ovladačích na XP?

Release Notes pro XP a Vista jsou stejné.

Open GL performance improves for all ATI Radeon™ X1000 series products. Gains of up to 25% in Doom 3, 48% in Quake 4 and 21% in Prey can be seen on a variety of ATI Radeon™ X1000 cards. These performance gains are noticed under the Windows Vista operating system.

ako je to s tym nacitavanim pri startup ? je to lepsie ?

Vraciam sa spat k 6.14. Ihned po nabehu hadze chyby - koli NOD32 (imon.dll), 1280x1024 stale nefunguje korektne na mojom LCD.

Ali Hasan píše:Vraciam sa spat k 6.14. Ihned po nabehu hadze chyby - koli NOD32 (imon.dll), 1280x1024 stale nefunguje korektne na mojom LCD.

divny me to funguje a to ma jeste vetsi monitor nez ty skus stahnout drivery k tvymu monitoru. i kdyz jak koukam ja ani od monitoru drivery nainstalovany nemam

tak skousel s tim nekdo pustit video ? ja jo a video se zacalo nechutne kousat a najednou mi naskakalo asi 5 erroru s ccc viz screen mno proste PARADA

Mne po naištalovaní 7.2 hlási CCC túto chybu.

"You dont have permission change Catalyst Control center setings.
Please contact zour administrator for furuther help."

Existuje ešte iný administrátor ako administrátor v XP

lidi, lidi... co s tím děláte, to já nikdy nepochopím .-) Neberte to nijak zle, ale mě to prostě funguje

no-X píše:lidi, lidi... co s tím děláte, to já nikdy nepochopím .-) Neberte to nijak zle, ale mě to prostě funguje

Ja ti verim aj mne doteraz všetky Catalysty fungovali. No a teraz toto ...
Hlavu si z toho nerobim, vratim sa k 7.1 a bude po probleme ....

Akurat som zarazeny touto usmevnou hláškou ...

juraj.h. píše:Existuje ešte iný administrátor ako administrátor v XP

Bill gates ti to musi dovolit nebo aspon sam nainstalovat

no-X píše:lidi, lidi... co s tím děláte, to já nikdy nepochopím .-) Neberte to nijak zle, ale mě to prostě funguje

mne bez problemovo zatial tiez, dokonca som spozoroval rychlejsi startup..
ale i tak to nie je stale ono (na nvidii som slapal rychlejsie)..
ale spozoroval som najvacsi problem tie ovladace updatovat..
nevypise ze musite vsetky aplikacie v pozadi pozatvarat (mozte cakat aj na spasenie) a neuveritelne problemy som zaznemal uz len pri pokusnom upgrade z 7.1 na 7.2 bez toho aby som povodne ovladace odinstaloval.. ale inac vsetko v poraidku (aspon zatial, len aby som to nezariekol)

tak nove 7.2 jsou v poho a hlavne ccc v poho jeste vic pri poklepani na ikonu okamzity start ne jak ty predchozi

stejny problem se spoustenim jsem mel v jedne verzi 6.x .. pomohl jen reinstall systemu.. netusim cim to bylo.. a CCC jsem zapl snad jen 2x a pokazde ok... pak uz se to nikdy nestalo...

Mno tak poprve neakej problem trefil i mne jde o ovladace na X64Win pro X1600 pri instalaci video driveru hodi chybu, "Thunk.exe" INF error Video driver not found ,instalacia se zavre a skoci na instalaci CCC. ale manualne pri tom de video driver z *.inf souboru nainstalovat normalne
Uz mam hlaseno ze tenhle problem ma i nekdo s x1800 na WINX64 coz uz asi nebude o nahode...

Dale mne udivuje ze pro WIN X64 je na stahnuti stejnej ovladac pro MB s IGP i pro externi VGA.

Co sem zatim zjistil bude to mozna problem s tim ze instalator nedokaze rozeznat VGA ale proc to je zatim zahada hlavne proto ze doted vsechny ovladace jeli normalne... Uvdime jeste se v tom vecer popitvam co z toho vznikne ...

Jestli tady nekdo pouziva x64 a ma x1xxx kartu pls ozvete se mi na pm jestli vam to dela taky abych vedel kde hledat pricinu ...

Zdravim,
no istalace v pohode ...ale spis jsem se chtel zeptat...mam msi 1950pro no a catalyst 7.2 stejne tak 7.1 proste nejdou taktovat a kdyz jo..tak mi to pekne zelene problikava:)))...Kdyz tam naperu zpet nejaky z 6 rady tak je vsechno v cajku...A fatk nevim,cim by to mohlo byt...nejak rada?(krom toho vzit to msi a vyhodit ho oknem ven)..

no-X píše:lidi, lidi... co s tím děláte, to já nikdy nepochopím .-) Neberte to nijak zle, ale mě to prostě funguje

mě to sice také funguje,ale ccc se vůbec nenainstaluje!!!!