MSI K8T NEO2-FIR<Bios not installed :(

[Necris]

Mám dotaz ohledně desky MSI K8T NEO2-FIR,kdy na začátku se zobrazuje (pro mě docela vtipně) hláška "BIos is not installed".Přitom BIOS jde spustit,Veškeré programy běží bez problému ale vadí mě tam ta hláška

Somebody help!Please


//Wilik - presunuto do vhodnejsi sekce

[Shit]

Mám dotaz ohledně desky MSI K8T NEO2-FIR,kdy na začátku se zobrazuje (pro mě docela vtipně) hláška "BIos is not installed".Přitom BIOS jde spustit,Veškeré programy běží bez problému ale vadí mě tam ta hláška

Somebody help!Please


//Wilik - presunuto do vhodnejsi sekce

Nepíše to náhodou něco ve významu, že SATA nemá nakonfigurovaný pole? (Disabluj SATA, pokud ho nepoužíváš).

[TomV]

http://forum.pctuning.cz/viewtopic.php? ... =installed

[romco]

Tu máš priamo z MSI fóra : (ako povedal shit)

BIOS- NO BIOS INSTALLED
This is a message that you see during bootup from the promise onboard raid saying that it found no drives attatched to its SATA or IDE channels so it's not installed the BIOS.This IS NOT a problem or anything to worry about!

I have had no problems using windows updating to the lastest bios (currently1.7
It cured some issues, such as firewire ports, sound blaster audigy1 troubles,tweaked temps displayed,and so on. but be sure to have a backup of original bios disk. I have heard new 1.8 beta bios cures newcastle temp problems.

some good settings are.. SMART enabled this will warn you of hard disk failure,System bios cacheble and shadow ram are more for older computers and should be set to disable.boot to os2- disable...memory setting vary by card and some even need to be set manually so check with manufacturer or get familiar with cmos reset jumper.(just be sure to have power off)...plug and play os to disable(more of a win 98 thing) disable serials and parallel ports if you dont need them, as with onboard sound firewire etc. this is just a few pointers the rest is a more personal thing, but i have heard turbo setting cuases problems and is best left to fast, and dynamic oc'ing is similar use at your own risk.V-Link-2x...for those of you wondering what it is..V-Link Hub Architecture is adedicated 266MB/sec link between the North and South Bridge, doubling the bandwidth of the traditional PCI Bus. so it should be enabled.

[Antton]

Pokud se nemýlím tak tvoje deska má 2 řadiče. Ty máš disk zapojený pouze v 1. A ten druhý řadič řve protože žádnej disk nenašel. Pokud ho nepoužíváš najdi si v biosu položku integrated peripherals nebo tak něco a tam máš VIA SATA RAID nebo něco podobnýho tak dej disabled.