Flashdisk - Vyřešeno

eraser · Příspěvek od **eraser** » stř 6. črc 2005, 13:06

mám problém s flashdiskem nejde mi vůbec přimountovat
lsusb

Bus 001 Device 003: ID 0c76:0005 JMTek, LLC. USBdisk

jinak v jádře podpora pro usb mass storage , scsi podpora , moduly : hotplug, coldplug , gentoo distribuce

no a když pak dám :
mount -t vfat /dev/sda1 /mnt/usbstick
tak
mount: /dev/sda1 není platným blokovým zařízením

čerpal sem z http://forums.gentoo.org/viewtopic-t-53 ... art-0.html

ještě dodám cat /proc/bus/usb/devices

Kód: Vybrat vše

T:  Bus=01 Lev=01 Prnt=01 Port=08 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0c76 ProdID=0005 Rev= 1.00
S:  Manufacturer=Kingston
S:  Product=DataTraveler 2.0
S:  SerialNumber=26F0D540C0621BC8
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=31875us
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=64ms

a dmesg:

Kód: Vybrat vše

usb 1-9: new high speed USB device using ehci_hcd and address 4
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
  Vendor: Kingston  Model: DataTraveler 2.0  Rev: 4.10
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0,  type 0
usb-storage: device scan complete
usb 1-9: USB disconnect, address 4
usb 1-9: new high speed USB device using ehci_hcd and address 5
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
  Vendor: Kingston  Model: DataTraveler 2.0  Rev: 4.10
  Type:   Direct-Access                      ANSI SCSI revision: 02

zkoušel sem mountovad to sg0 taky to samý a to scsi1 neexistuje

TomV · Příspěvek od **TomV** » stř 6. črc 2005, 13:30

Strč tam flashdisk a hned potom mrkni do logu, kam ti ho jádro přiřadilo. Nemusí to být vždycky sda1...

eraser · Příspěvek od **eraser** » stř 6. črc 2005, 14:19

tak log je celkem dlouhej doufám , že se z toho něco vyčte

Kód: Vybrat vše

Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Command INQUIRY (6 bytes)
Jul  6 14:15:57 erda usb-storage:  12 00 00 00 24 00
Jul  6 14:15:57 erda usb-storage: Bulk Command S 0x43425355 T 0x20 L 36 F 128 Trg 0 LUN 0 CL 6
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 31/31
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk command transfer result=0
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 36/36
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk data transfer result 0x0
Jul  6 14:15:57 erda usb-storage: Attempting to get CSW...
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 13/13
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk status result = 0
Jul  6 14:15:57 erda usb-storage: Bulk Status S 0x53425355 T 0x20 R 0 Stat 0x0
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x0
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda Vendor: Kingston  Model: DataTraveler 2.0  Rev: 4.10
Jul  6 14:15:57 erda Type:   Direct-Access                      ANSI SCSI revision: 02
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Command TEST_UNIT_READY (6 bytes)
Jul  6 14:15:57 erda usb-storage:  00 00 00 00 00 00
Jul  6 14:15:57 erda usb-storage: Bulk Command S 0x43425355 T 0x21 L 0 F 0 Trg 0 LUN 0 CL 6
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 31/31
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk command transfer result=0
Jul  6 14:15:57 erda usb-storage: Attempting to get CSW...
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 13/13
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk status result = 0
Jul  6 14:15:57 erda usb-storage: Bulk Status S 0x53425355 T 0x21 R 0 Stat 0x1
Jul  6 14:15:57 erda usb-storage: -- transport indicates command failure
Jul  6 14:15:57 erda usb-storage: Issuing auto-REQUEST_SENSE
Jul  6 14:15:57 erda usb-storage: Bulk Command S 0x43425355 T 0x80000021 L 18 F 128 Trg 0 LUN 0 CL 6
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 31/31
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk command transfer result=0
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 18/18
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk data transfer result 0x0
Jul  6 14:15:57 erda usb-storage: Attempting to get CSW...
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 13/13
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk status result = 0
Jul  6 14:15:57 erda usb-storage: Bulk Status S 0x53425355 T 0x80000021 R 0 Stat 0x0
Jul  6 14:15:57 erda usb-storage: -- Result from auto-sense is 0
Jul  6 14:15:57 erda usb-storage: -- code: 0xf0, key: 0x6, ASC: 0x28, ASCQ: 0x0
Jul  6 14:15:57 erda usb-storage: (Unknown Key): (unknown ASC/ASCQ)
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x2
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Command TEST_UNIT_READY (6 bytes)
Jul  6 14:15:57 erda usb-storage:  00 00 00 00 00 00
Jul  6 14:15:57 erda usb-storage: Bulk Command S 0x43425355 T 0x22 L 0 F 0 Trg 0 LUN 0 CL 6
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 31/31
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk command transfer result=0
Jul  6 14:15:57 erda usb-storage: Attempting to get CSW...
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 13/13
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk status result = 0
Jul  6 14:15:57 erda usb-storage: Bulk Status S 0x53425355 T 0x22 R 0 Stat 0x0
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x0
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Command READ_CAPACITY (10 bytes)
Jul  6 14:15:57 erda usb-storage:  25 00 00 00 00 00 00 00 00 00
Jul  6 14:15:57 erda usb-storage: Bulk Command S 0x43425355 T 0x23 L 8 F 128 Trg 0 LUN 0 CL 10
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 31/31
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk command transfer result=0
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 8/8
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk data transfer result 0x0
Jul  6 14:15:57 erda usb-storage: Attempting to get CSW...
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 13/13
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk status result = 0
Jul  6 14:15:57 erda usb-storage: Bulk Status S 0x53425355 T 0x23 R 0 Stat 0x0
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x0
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda SCSI device sda: 503808 512-byte hdwr sectors (258 MB)
Jul  6 14:15:57 erda sda: assuming Write Enabled
Jul  6 14:15:57 erda sda: assuming drive cache: write through
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Command TEST_UNIT_READY (6 bytes)
Jul  6 14:15:57 erda usb-storage:  00 00 00 00 00 00
Jul  6 14:15:57 erda usb-storage: Bulk Command S 0x43425355 T 0x24 L 0 F 0 Trg 0 LUN 0 CL 6
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 31/31
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk command transfer result=0
Jul  6 14:15:57 erda usb-storage: Attempting to get CSW...
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 13/13
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk status result = 0
Jul  6 14:15:57 erda usb-storage: Bulk Status S 0x53425355 T 0x24 R 0 Stat 0x0
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x0
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
Jul  6 14:15:57 erda usb-storage:  1e 00 00 00 01 00
Jul  6 14:15:57 erda usb-storage: Bulk Command S 0x43425355 T 0x25 L 0 F 0 Trg 0 LUN 0 CL 6
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 31/31
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk command transfer result=0
Jul  6 14:15:57 erda usb-storage: Attempting to get CSW...
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 13/13
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk status result = 0
Jul  6 14:15:57 erda usb-storage: Bulk Status S 0x53425355 T 0x25 R 0 Stat 0x1
Jul  6 14:15:57 erda usb-storage: -- transport indicates command failure
Jul  6 14:15:57 erda usb-storage: Issuing auto-REQUEST_SENSE
Jul  6 14:15:57 erda usb-storage: Bulk Command S 0x43425355 T 0x80000025 L 18 F 128 Trg 0 LUN 0 CL 6
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 31/31
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk command transfer result=0
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 18/18
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk data transfer result 0x0
Jul  6 14:15:57 erda usb-storage: Attempting to get CSW...
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 13/13
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk status result = 0
Jul  6 14:15:57 erda usb-storage: Bulk Status S 0x53425355 T 0x80000025 R 0 Stat 0x0
Jul  6 14:15:57 erda usb-storage: -- Result from auto-sense is 0
Jul  6 14:15:57 erda usb-storage: -- code: 0xf0, key: 0x5, ASC: 0x20, ASCQ: 0x0
Jul  6 14:15:57 erda usb-storage: (Unknown Key): (unknown ASC/ASCQ)
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x2
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Command TEST_UNIT_READY (6 bytes)
Jul  6 14:15:57 erda usb-storage:  00 00 00 00 00 00
Jul  6 14:15:57 erda usb-storage: Bulk Command S 0x43425355 T 0x26 L 0 F 0 Trg 0 LUN 0 CL 6
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 31/31
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk command transfer result=0
Jul  6 14:15:57 erda usb-storage: Attempting to get CSW...
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 13/13
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk status result = 0
Jul  6 14:15:57 erda usb-storage: Bulk Status S 0x53425355 T 0x26 R 0 Stat 0x0
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x0
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Command READ_CAPACITY (10 bytes)
Jul  6 14:15:57 erda usb-storage:  25 00 00 00 00 00 00 00 00 00
Jul  6 14:15:57 erda usb-storage: Bulk Command S 0x43425355 T 0x27 L 8 F 128 Trg 0 LUN 0 CL 10
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 31/31
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk command transfer result=0
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 8/8
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk data transfer result 0x0
Jul  6 14:15:57 erda usb-storage: Attempting to get CSW...
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 13/13
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk status result = 0
Jul  6 14:15:57 erda usb-storage: Bulk Status S 0x53425355 T 0x27 R 0 Stat 0x0
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x0
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda SCSI device sda: 503808 512-byte hdwr sectors (258 MB)
Jul  6 14:15:57 erda sda: assuming Write Enabled
Jul  6 14:15:57 erda sda: assuming drive cache: write through
Jul  6 14:15:57 erda sda:<7>usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Command READ_10 (10 bytes)
Jul  6 14:15:57 erda usb-storage:  28 00 00 00 00 00 00 00 08 00
Jul  6 14:15:57 erda usb-storage: Bulk Command S 0x43425355 T 0x28 L 4096 F 128 Trg 0 LUN 0 CL 10
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 31/31
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk command transfer result=0
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 4096/4096
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk data transfer result 0x0
Jul  6 14:15:57 erda usb-storage: Attempting to get CSW...
Jul  6 14:15:57 erda usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jul  6 14:15:57 erda usb-storage: Status code 0; transferred 13/13
Jul  6 14:15:57 erda usb-storage: -- transfer complete
Jul  6 14:15:57 erda usb-storage: Bulk status result = 0
Jul  6 14:15:57 erda usb-storage: Bulk Status S 0x53425355 T 0x28 R 0 Stat 0x0
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x0
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda sda1
Jul  6 14:15:57 erda Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
Jul  6 14:15:57 erda Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0,  type 0
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Bad target number (1:0)
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x40000
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Bad target number (2:0)
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x40000
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Bad target number (3:0)
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x40000
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Bad target number (4:0)
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x40000
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Bad target number (5:0)
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x40000
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Bad target number (6:0)
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x40000
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda usb-storage: queuecommand called
Jul  6 14:15:57 erda usb-storage: *** thread awakened.
Jul  6 14:15:57 erda usb-storage: Bad target number (7:0)
Jul  6 14:15:57 erda usb-storage: scsi cmd done, result=0x40000
Jul  6 14:15:57 erda usb-storage: *** thread sleeping.
Jul  6 14:15:57 erda usb-storage: device scan complete
Jul  6 14:15:57 erda scsi.agent[8174]: disk at /devices/pci0000:00/0000:00:02.1/usb1/1-9/1-9:1.0/host2/target2:0:0/2:0:0:0

ještě možná :

Kód: Vybrat vše

Jul  6 14:23:46 erda usb 1-9: new high speed USB device using ehci_hcd and address 6
Jul  6 14:23:46 erda usb-storage: USB Mass Storage device detected
Jul  6 14:23:46 erda usb-storage: -- associate_dev
Jul  6 14:23:46 erda usb-storage: Vendor: 0x0c76, Product: 0x0005, Revision: 0x0100
Jul  6 14:23:46 erda usb-storage: Interface Subclass: 0x06, Protocol: 0x50
Jul  6 14:23:46 erda usb-storage: Vendor: Kingston,  Product: DataTraveler 2.0
Jul  6 14:23:46 erda usb-storage: Transport: Bulk
Jul  6 14:23:46 erda usb-storage: Protocol: Transparent SCSI
Jul  6 14:23:46 erda usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
Jul  6 14:23:46 erda usb-storage: GetMaxLUN command result is 1, data is 0
Jul  6 14:23:46 erda scsi3 : SCSI emulation for USB Mass Storage devices
Jul  6 14:23:46 erda usb-storage: *** thread sleeping.
Jul  6 14:23:46 erda usb-storage: device found at 6
Jul  6 14:23:46 erda usb-storage: waiting for device to settle before scanning
Jul  6 14:23:48 erda syslog-ng[6230]: STATS: dropped 0
Jul  6 14:23:50 erda hub 2-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
Jul  6 14:23:50 erda usb 2-3: USB disconnect, address 6

to se stalo ještě před tamtim ( i když časově to je naopak )

eraser · Příspěvek od **eraser** » stř 6. črc 2005, 14:55

ten linux je kouzelnej

Kód: Vybrat vše

erda root # mount -t vfat /dev/sda1 /mnt/kingston/
erda root # ls /mnt/kingston/
amp
readme.txt
Re.doc
-=[SKOLA]=-
smb.conf.txt
VooDoo
Within Temptation - Mother Earth (Knights Of The Temple Remix).wmv

fakt netučím že to najednou začalo fachat

[CZ]Al@n · Příspěvek od **[CZ]Al@n** » pát 19. srp 2005, 21:43

cus..já mam taky problém s flashdiskem..když ho připojim a chci ho otevřít tak se mi hodí hláška jestli ho chci naformátovat a když nechci tak se neotevře a když ho chci teda naformátovat tak to nejde

neporadí mi někdo co s tim??

eraser · Příspěvek od **eraser** » sob 20. srp 2005, 11:27

a máš v kernelu zaplou podporu FAT32 , v případě že máš ten fat32 i natom usb sticku

//EDIT

já mám NTFS....

ale to je ti na 2 věci , musíš mít zapnutou v kernelu podporu pro fat32 (vfat) !!!!!!

[CZ]Al@n · Příspěvek od **[CZ]Al@n** » ned 21. srp 2005, 08:05

já mam NTFS a na tom USB disku vubec nevim co je ale když to chce formátopvat tak jedině ve formátu FAT32.

trancelis · Příspěvek od **trancelis** » čtv 25. srp 2005, 10:49

Ujisti se, že v jádře máš podporu USB, USB Mass Storage, FAT a _hlavně_ modul s NLS pro vfat (stačí mít iso-8859-2, 8859-1, us-ascii a cp1250). pak emergni "ivman" a nahoď ho: /etc/init.d/ivman start. Tím se rozjede HAL mounter a všecko ti bude mountovat do /media, třeba foťáky, flashky, ipody... prostě dokonalý

)

TomV · Příspěvek od **TomV** » čtv 25. srp 2005, 10:58

[CZ]Al@n píše:já mam NTFS a na tom USB disku vubec nevim co je ale když to chce formátopvat tak jedině ve formátu FAT32.

Na USB flashdiscích bývá právě většinou FAT32, na těch malých pak FAT16...

Flashdisk - Vyřešeno

Flashdisk - Vyřešeno

Gentoo "IT WORKS" howto :)