Neidu mi 2 sietovky sucastne

[mety]

ahoj.Potrebujem poradit.Debian linux mi nechce zobrat 2 sietovky,iba 1.
Ak dam zapnut aj druhu ani ju nespusti .Su to sietovky 3 com 3c509
Neviete mi poradit?Linux moc neovladam.Ale ak dam 2 sietovky inych znaciek tak v pohode ide.Cim to je?DikyPS:robila mi to kazda jedna distribucia linuxu

[next_ghost]

Napiš do konzole příkazy `ls /dev/eth?` a `ifconfig` bez apostrofů a zkopíruj sem co z nich vyleze.

[mety]

Ten prvy prikaz vyhodilo subor nenajdeny a druhy:
eth0 Link encap:Ethernet HWaddr 00:60:08:7D:7B:A1
inet addr:192.168.0.4 Bcast:192.168.0.255 Mask:255.255.255.0
EtherTalk Phase 2 addr:65280/240
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:529 errors:0 dropped:0 overruns:0 frame:0
TX packets:592 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
RX bytes:348711 (340.5 KiB) TX bytes:111131 (108.5 KiB)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
EtherTalk Phase 2 addr:0/0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:172 errors:0 dropped:0 overruns:0 frame:0
TX packets:172 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
RX bytes:34674 (33.8 KiB) TX bytes:34674 (33.8 KiB)

[next_ghost]

Tak jinak. Zkus příkaz `lspci`. Jestli ho nemáš, nainstaluj si pciutils.

[mety]

Ta karta nieje PCI ale ISA

[next_ghost]

V tom případě nainstaluj ISAPNPTOOLS a pošli sem výstup příkazu `pnpdump`.

Taky si zkontroluj, jestli maj ty karty různý MAC adresy (položka HWaddr v ifconfigu), protože podle MAC adres by měl ovladač rozhodovat, která karta bude eth0 a která eth1.

[mety]

debian:~# pnpdump
# $Id: pnpdump_main.c,v 1.27 2001/04/30 21:54:53 fox Exp $
# Release isapnptools-1.26
#
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
#
# For details of the output file format, see isapnp.conf(5)
#
# For latest information and FAQ on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
#
# Compiler flags: -DREALTIME -DHAVE_PROC -DENABLE_PCI -DHAVE_SCHED_SETSCHEDULER -DHAVE_NANOSLEEP -DWANT_TO_VALIDATE
#
# Trying port address 0273
# Trying port address 027b
# Trying port address 0283
# Trying port address 028b
# Trying port address 0293
# Trying port address 029b
# Trying port address 02a3
# Trying port address 02ab
# Trying port address 02b3
# Trying port address 02bb
# Trying port address 02c3
# Trying port address 02cb
# Trying port address 02d3
# Trying port address 02db
# Trying port address 02e3
# Trying port address 02eb
# Trying port address 02f3
# Trying port address 0313
# Trying port address 031b
# Trying port address 0323
# Trying port address 032b
# Trying port address 0333
# Trying port address 033b
# Trying port address 0343
# Trying port address 034b
# Trying port address 0353
# Trying port address 035b
# Trying port address 0363
# Trying port address 036b
# Trying port address 0373
# Trying port address 037b
# Trying port address 0383
# Trying port address 038b
# Trying port address 0393
# Trying port address 039b
# Trying port address 03a3
# Trying port address 03ab
# Trying port address 03b3
# Trying port address 03bb
# Trying port address 03e3
# Trying port address 03eb
# Trying port address 03f3
# No boards found
debian:~#

[next_ghost]

hmm, tak jestli máš teď ovladač v jádře (`lsmod` nevypíše v seznamu "3c509"), tak zkompiluj jádro s tim ovladačem v modulu a zkus postupovat podle návodu na http://www.linuxtopia.org/online_books/ ... sec88.html. BTW, testoval si doufam jestli sou obě karty funkční a s rozdílnejma MAC adresama.

[NeMeM9aA]

Nevim jak je na tom tenhle 3com, ale na Intel ISA sitovce, kterou jsem testoval, se musel pomoci dos prg nastavit IRQ. Nema neco podobneho i tenhle 3com? (nemaji stejne IRQ?).