Jak naznačuje jméno tématu, mám problém s "ambient light sensorem" u lcd HP w2408h. Sensor se jednou za čas vypne a já ho musím znova ručně zapínat v menu. Zmínku o tomhle problému jsem našel např. tady
trikes píše:Regarding the Ambient Light feature:
This this is very unreliable. It will turn off for no reason when the machine goes to suspend state.
I run two of these monitors (Dual Screen setup) and one or the other of them randomly shuts off the Ambient light feature every day. There is no way to lock this feature on.
Of course HP tech support are people in India with an accent so thick you can't communicate with them.
"Doo you see the Ambient Light Sensor Shining at you when the power is on"?
No, it doesn't shine.
"Could you please turn on the monitor then".
It is on. But the ambient light sensor is off.
"Can you turn it on and then verify that it is shining at you".
I can turn it on but it will not shine. Its not supposed to shine.
"Can you re install the operating system with the system restore disk"
John Andersen píše:Give that Ambient light sensor a chance. Its not a instant change.
Also, fiddling around with Scaling can sometimes kill he light sensor and you have to go back and reset it.
The light sensor often goes off when the monitor goes to sleep state, requiring that you
set it on again. Drives me nuts.
řešení ale nikde
#1: Intel Core 2 Duo E7200 @ 3,5 GHz, 1,384 V (load) + Scythe Ninja + Xilence Redwing 120 mm || 4 GB RAM by Kingston || Leadtek Geforce 8800 GTS 512 MB @ 760/1850/2000 MHz + Arctic Cooling Accelero S1 + Xilence Redwing 120 mm || Asus P5K-e/Wi-Fi || 2x WD6400AAKS @ 2x Silentmaxx HDD Silencer + trocha molitanu + Xilence Redwing 120 mm + AAM turned off, 250 GB RAID1, the rest RAID0 || SB X-Fi Gamer || Zalman ZM600HP + Noctua NF-P12-1300 || Thermaltake Soprano, 2x Xilence Redwing 120 mm || All fans 40% @ idle, 60% @ high load || 24" HP w2408h || 5.1 Genius Home Theater || Razer Krait || MS Windows Vista x64 Business SP1
#2: Dell Latitude E6500: Intel Core 2 Duo P8600 @ 1,150 V || 4 GB RAM || NVIDIA Quadro NVS 160M || 250 GB HDD, 7200 RPM || WXGA+ led podsvícení || Razer Lachesis || MS Windows 7 Ultimate Beta
#3: HTC Touch Pro: 528 MHz || 288 MB RAM || 16 GB SanDisk micro SDHC || Koss Porta Pro || MS Windows Mobile 6.1 - PROven ROM
me se light senzor taky vypinal pokud jsem rozjel neco v rozliseni ktery jeste na lcd nejelo,proste jine nez nativni, v pripade opakovani uz zustal aktivni !---------ja jsem ho ale prestal uzivat ,protoze ve tme ,prisvecovano jenom lampickou me lcd hodne ztmavoval dalo se na to koukat ale nebylo to ono, tak jsem nastavil jas a cont. manualne a spokojenost
Mně se zdá, že se to děje kdykoliv, protože dneska sem ráno kontroloval jestli je sensor zapnutej, za celej den sem monitor nevypínal ani neměnil rozlišení.... No a teď jsem si všiml, že sensor je zase off. Jestli s tím nic nepůjde dělat, tak si asi nechám permanentě něco jako 50% jasu a bude to. Ale škoda toho sensoru, no.....
#1: Intel Core 2 Duo E7200 @ 3,5 GHz, 1,384 V (load) + Scythe Ninja + Xilence Redwing 120 mm || 4 GB RAM by Kingston || Leadtek Geforce 8800 GTS 512 MB @ 760/1850/2000 MHz + Arctic Cooling Accelero S1 + Xilence Redwing 120 mm || Asus P5K-e/Wi-Fi || 2x WD6400AAKS @ 2x Silentmaxx HDD Silencer + trocha molitanu + Xilence Redwing 120 mm + AAM turned off, 250 GB RAID1, the rest RAID0 || SB X-Fi Gamer || Zalman ZM600HP + Noctua NF-P12-1300 || Thermaltake Soprano, 2x Xilence Redwing 120 mm || All fans 40% @ idle, 60% @ high load || 24" HP w2408h || 5.1 Genius Home Theater || Razer Krait || MS Windows Vista x64 Business SP1
#2: Dell Latitude E6500: Intel Core 2 Duo P8600 @ 1,150 V || 4 GB RAM || NVIDIA Quadro NVS 160M || 250 GB HDD, 7200 RPM || WXGA+ led podsvícení || Razer Lachesis || MS Windows 7 Ultimate Beta
#3: HTC Touch Pro: 528 MHz || 288 MB RAM || 16 GB SanDisk micro SDHC || Koss Porta Pro || MS Windows Mobile 6.1 - PROven ROM
