Mam tyden starou externi USB vypalovacku LG GE20NU10. Kdyz vypalim CD v rezimu "Disc-At-Once" , tak se nero zastavi asi ve 40%, HDD prestane posilat data do nera, vypaleni bezi dal. Vypalim teba tri soubory o velikosti 200MB, prvni je citelny, ale v ostatnich souborech jsou zapsane same nuly. DVD vypaluje spravne.
Mam jeste jednu interni vypalovacku a tam k problemum pri vypalovani CD v neru nedochazi.
Pokud vypalim CD pres program WMP nebo CD-DVD speed tak k zadne chybe nedojde. Zkousel jsem reinstal nera na novejsi verzi a je to stale stejne.
Dochazi k tomu i pri simulaci, vypaluji 16X, zkousel jsem i nizsi rychlosti a ruzna media
Pokud pri asi 40% vypaleni nero prestane zobrazovat stav kolik je uz hotovo, vytahnu usb kabel z vypalovacky a ta pali dal az do konce cd (same nuly) Zjistil jsem to pres program IsoBuster kdy jsem si nechal zobrazit sektory.
Jedine kdy se mi podarilo vypalit CD tak v rezimu "Track-at-once" v "Disk-at-once" dochazelo k preruseni. Data jsem vypaloval z HDD
Pri kopirovani z cd-rom v rezimu "On the Fly" do vypalovacky jde v neru vse bez problemu.
Takto se Nero zastavi na 17% a vypalovacka zapisuje dal (same nuly)
Jeste posilam log:
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.11.6.0
Internal Version: 7, 11, 6, 0
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GE20NU10>Version: EE06 - HA 1 TA 4 - 7.11.6.0
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI
CD-ROM: <BENQ DVD LS DW1655 >Version: BCIB - HA 1 TA 1 - 7.11.6.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3160812A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TEAC CD-552G atapi Port 0 ID 1 DMA: On
CdRomPeripheral : BENQ DVD LS DW1655 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVD SOHD-16P9S atapi Port 2 ID 1 DMA: On
CdRomPeripheral : ZI3152T DMQ855R 1.0 az3zaozo Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
TEAC CD-552G F: CdRom0
BENQ DVD LS DW1655 D: CdRom1
LITE-ON DVD SOHD-16P9S E: CdRom2
ZI3152T DMQ855R J: CdRom3
HL-DT-ST DVDRAM GE20NU10 K: CdRom4
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 639MB (654832kB)
Free physical memory: 288MB (295812kB)
Memory in use : 54 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.3.2009
CD-ROM (UDF)
21:21:36 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
21:21:37 #2 Text 0 File Isodoc.cpp, Line 6671
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
21:21:37 #3 Text 0 File Burncd.cpp, Line 3186
HL-DT-ST DVDRAM GE20NU10
Ochrana podtečení zásobníku aktivováno
21:21:37 #4 Text 0 File Burncd.cpp, Line 3500
Turn on Disc-At-Once, using CD-R/RW media
21:21:37 #5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorCD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
21:21:38 #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 359775 ( 79:59.00)
21:21:38 #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
21:21:38 #8 Text 0 File DlgWaitCD.cpp, Line 2988
Recorder: HL-DT-ST DVDRAM GE20NU10;
CDRW code: 00 97 34 25; OSJ entry from: Mitsubishi Chemical
ATIP Data:
Special Info [hex] 1: 80 00 DF, 2: 61 22 19 (LI 97:34.25), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80, 2: 39 80 00, 3: 04 C4 B8
21:21:38 #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
21:21:40 #10 SPTI -1023 File SCSIPassThrough.cpp, Line 181
CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1023)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0xA3 00 00 00 00 00 00 21 00 2C 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A A3 00 00 90 2C
Buffer x0572f000: Len x2c
0x00 2A 00 00 90 36 C5 08 61 0E B5 95 F9 C7 5C 28
0x95 F7 72 5E 00 1F D1 90 8B 41 29 97 97 4D F6 73
0xF7 77 89 16 A5 26 00 00 00 01 00 00
21:21:40 #11 SPTI -1023 File SCSIPassThrough.cpp, Line 181
CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1023)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0xA3 00 00 00 00 00 00 21 00 2A 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A A3 00 00 90 2C
Buffer x071efa40: Len x2a
0x00 28 00 00 90 36 C5 08 61 0E B5 95 F9 C7 5C 28
0x95 F7 72 5E 00 1F D1 90 8B 41 29 97 97 4D F6 73
0xF7 77 89 16 A5 26 00 00 00 01
21:21:45 #12 UDF2 0 File BUSFeatureReport.cpp, Line 13
SecurDisc(TM) features in use:
Data Integrity Check
Data Reliability (Level: Good (1.07x))
21:21:45 #13 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 359776 (359776) = #359776/79:57.1
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 359776 blocks [K: HL-DT-ST DVDRAM GE20NU10]
--------------------------------------------------------------
21:21:45 #14 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [K: HL-DT-ST DVDRAM GE20NU10] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 737128448, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 359776 | 0 | 0x00
359776 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
21:21:45 #15 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
21:21:45 #16 Text 0 File Burncd.cpp, Line 4286
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
21:21:45 #17 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
21:21:45 #18 Text 0 File Burncd.cpp, Line 4405
Cache writing successful.
21:21:45 #19 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
21:21:45 #20 Phase 32 File dlgbrnst.cpp, Line 1767
Simulation started at 32x (4 800 kB/s)
21:21:45 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2733
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
21:21:45 #22 Text 0 File MMC.cpp, Line 17806
StartDAO : CD-Text - Off
21:21:45 #23 Text 0 File MMC.cpp, Line 22488
Set BUFE: Buffer underrun protection -> ON
21:21:45 #24 Text 0 File MMC.cpp, Line 18034
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 4f 3b 01
21:21:45 #25 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800
21:21:45 #26 Text 0 File CUDFTransferItem2.cpp, Line 637
GenUDF2 FS Layout:
=-=-=-=-=-=-=-=-=-=-
Sectors to be written: 359776
Session Start: Sector 0
Volume Structure: Sector [0, 256] (257 Sectors)
Before Meta Data: Sector [257, 288] (32 Sectors)
Meta Data: Sector [289, 296] (8 Sectors)
Data: Sector [297, 334991] (334695 Sectors)
SecurDisc structures: Sector [334992, 359449] (24458 Sectors)
After Data: Sector [359450, 359455] (6 Sectors)
Trailer Track: Sector [359456, 359775] (320 Sectors)
GenUDF2 Parameters:
=-=-=-=-=-=-=-=-=-=-
PrepTime: 03-03-2009 21:21:38
UDF Revision: 1.02
UDF Partition Type: Physical
UDF Special Mode: None
Bytes per Sector: 2048
Session Start: 0
Physical Partition Start: -1
Total Capacity: 359849
Multi Session Mode: None
Disc Type: CD-RW
OS Class: 0
Volume ID: Disk
Allow Unicode Labels: 0
Duplicate Meta Data: 1
MS Info File: 00000000
VMS Rollback File: 00000000
Create ISO bridge: 0
ECC Block Length: 32
Sparing Packet Length: 32
Allocation Unit Size: 32
Alignment Unit Size: 32
Make Writable: 0
Access Type: Read-only
21:25:46 #27 SPTI -600 File SCSIPassThrough.cpp, Line 181
CdRom4: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 A2 20 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x089b0500: Len x10000
0xC6 7C 5E D2 1A 4B 03 ED 62 D6 48 8A 07 9F DE 4D
0x02 EC 54 72 70 A8 55 07 EE AA AF 89 0B ED 7D 9B
0xE2 23 37 AB 5B 04 59 69 ED 21 37 DC D2 DB F3 F8
21:25:46 #28 CDR -600 File Writer.cpp, Line 306
Device not available
K: HL-DT-ST DVDRAM GE20NU10
21:25:51 #29 SPTI -1114 File SCSIPassThrough.cpp, Line 181
CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 90 29
21:25:51 #30 CDR -1114 File WriterStatus.cpp, Line 287
Reset occurred
K: HL-DT-ST DVDRAM GE20NU10
21:25:51 #31 TRANSFER -24 File WriterStatus.cpp, Line 287
Could not perform end of Disc-at-once
21:25:51 #32 Phase 34 File dlgbrnst.cpp, Line 1767
Simulation failed at 32x (4 800 kB/s)
21:25:53 #33 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
21:26:00 #34 Text 0 File Cdrdrv.cpp, Line 11412
DriveLocker: UnLockVolume completed
21:26:01 #35 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\GIVEIO.SYS': Ver=?.?.?.?, size=5248 bytes, created 3.4.1996 20:33:26 (Power saving: VCool probably installed)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)