zajímají mne Vaše osobní zkušenosti s použitím power injectorů. Trošku mi uniká význam užití aktivních power injectorů oproti pasivním. Teorie mne moc nezajímá, jaké jsou Vaše postřehy z praxe? Já jsem kromě toho, že passive POE neodpovídá standardu nenašel žádný problém. Více povím po ročním ostrém provozu
Provedl jsem malý test:
Co z toho usoudit nevím.
AIR-PWRINJ3 (cena cca 1000 CZK)
Minitar passive POE injector (cena cca 75 CZK)
AIR-AP1131AG-E-K9 (cena cca 8000 CZK)
AIR-AP1242AG-E-K9 (cena cca 10000 CZK)
Délka kabelu:
Kód: Vybrat vše
WS-C2960-8TC-L#sh cable-diagnostics tdr int fa0/1
TDR test last run on: March 01 04:07:54
Interface Speed Local pair Pair length Remote pair Pair status
--------- ----- ---------- ------------------ ----------- --------------------
Fa0/1 auto Pair B 193 +/- 1 meters N/A Open
Pair B 193 +/- 1 meters N/A Open
Pair C N/A N/A Not Supported
Pair D N/A N/A Not SupportedKód: Vybrat vše
ap#sh int BVI1
BVI1 is up, line protocol is up
Hardware is BVI, address is 001d.4551.ab7a (bia 001d.46fe.a8f0)
Internet address is 192.168.1.11/24
MTU 1500 bytes, BW 54000 Kbit, DLY 5000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
4 packets output, 240 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped outKód: Vybrat vše
ap#sh int BVI1
BVI1 is up, line protocol is up
Hardware is BVI, address is 001d.a1fe.1534 (bia 001f.2755.33f0)
Internet address is 192.168.1.11/24
MTU 1500 bytes, BW 54000 Kbit, DLY 5000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
1 packets input, 60 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
14 packets output, 1166 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped outKód: Vybrat vše
ap#sh int BVI1
BVI1 is up, line protocol is up
Hardware is BVI, address is 001d.4551.ab7a (bia 001d.46fe.a8f0)
Internet address is 192.168.1.11/24
MTU 1500 bytes, BW 54000 Kbit, DLY 5000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
3 packets input, 180 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
9 packets output, 596 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped outKód: Vybrat vše
ap#sh int BVI1
BVI1 is up, line protocol is up
Hardware is BVI, address is 001d.a1fe.1534 (bia 001f.2755.33f0)
Internet address is 192.168.1.11/24
MTU 1500 bytes, BW 54000 Kbit, DLY 5000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
1 packets input, 60 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
25 packets output, 1780 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped outKód: Vybrat vše
Odpoved od 192.168.1.11: bajty=32 cas=4ms TTL=255
Odpoved od 192.168.1.11: bajty=32 cas < 1ms TTL=255
Odpoved od 192.168.1.11: bajty=32 cas < 1ms TTL=255
Odpoved od 192.168.1.11: bajty=32 cas < 1ms TTL=255
Odpoved od 192.168.1.11: bajty=32 cas=4ms TTL=255
Odpoved od 192.168.1.11: bajty=32 cas < 1ms TTL=255
Odpoved od 192.168.1.11: bajty=32 cas < 1ms TTL=255
Odpoved od 192.168.1.11: bajty=32 cas < 1ms TTL=255
Odpoved od 192.168.1.11: bajty=32 cas=4ms TTL=255
Odpoved od 192.168.1.11: bajty=32 cas < 1ms TTL=255
Odpoved od 192.168.1.11: bajty=32 cas < 1ms TTL=255
Odpoved od 192.168.1.11: bajty=32 cas < 1ms TTL=255
Odpoved od 192.168.1.11: bajty=32 cas=4ms TTL=255Kód: Vybrat vše
Odpoved od 192.168.1.11: bajty=32 cas=2ms TTL=255
Odpoved od 192.168.1.11: bajty=32 cas < 1ms TTL=255
Odpoved od 192.168.1.11: bajty=32 cas < 1ms TTL=255
Odpoved od 192.168.1.11: bajty=32 cas=2ms TTL=255
Odpoved od 192.168.1.11: bajty=32 cas < 1ms TTL=255
Odpoved od 192.168.1.11: bajty=32 cas < 1ms TTL=255
Odpoved od 192.168.1.11: bajty=32 cas < 1ms TTL=255
Odpoved od 192.168.1.11: bajty=32 cas=2ms TTL=255
Odpoved od 192.168.1.11: bajty=32 cas < 1ms TTL=255
Odpoved od 192.168.1.11: bajty=32 cas < 1ms TTL=255
Odpoved od 192.168.1.11: bajty=32 cas < 1ms TTL=255
Odpoved od 192.168.1.11: bajty=32 cas=2ms TTL=255
