Port forwarding - jak ?

[Alfajk]

jak mam udelat port forwarding?

mam hru,ta vyzaduje otevrenej port 16 000,kterej je nejspis zavrenej (alespon to hlasi program port forward checker),program ale port neotevre,pokud si ho nezakoupim - mam jen trial

os win 7,router Model No. TL-WR741N

[CageJ]

http://2.bp.blogspot.com/-qqWPDTi__mU/U ... 1600/4.png

toto (v routing)
odporucam ale mat pevne priradenu adresu pre dane PC, ak pouziva viac zariadeni

Pripadne urob screen na tvojom routri, nech sa nato blizsie pozrieme. Mini rozdiely tam obcas su..
A application tam nemusis myslis nic vyklikavat.
EDIT: Toto je pre iny typ routra
http://helpix.ru/pic/vilianov/onlime/tp_link_menu.gif

Kazodpadne mal by si tam mat UDP/TCP. Neviem ktory protokol sa vyzaduje, ale mal som 2 TP-Linky a iba jeden vedel otvorit obe naraz, takze treba vyskusat ktory.

[Alfajk]

pozivam celkem 3 pc + notebook wifi + 2 telefony wifi,takze jako prvni by to asi chtelo poresit adresy pc,protoze takhle zalezi na tom,ktery pc se zapne prvni a jako prvni tu adresu dostane - to udelam jak, aby meli pokazdy pevnou ip ale zaroven aby bylo mozny pripojit libovolnej pocet dalsich zarizeni jako ty wifi telefony?

v routeru to vypada takhle,viz priloha,co tam mam z ty nabidky vybrat?

[CageJ]

Co sa tyka toho Commom Service Portu, to vidim prvykrat.. Takuto moznost som dokonca nemal.. Takze asi skusaj, alebo napis na support danej hry. Niekde to ale uvadzat musia.. Tipujem to ale na FTP/HTTP/PPTP. Najskor ten PPTP.

Co sa tyka tych Mac adries a pevnych IP, to bude bud v ''Network'' alebo DHCP. Tam odporucam vyradit DHCP a kazdemu zariadeniu podla MAC adresy pripradit na pevno IP. Alebo nechaj aktivnu DHCP, daj tam limit tych adries, pripadne IP iba pre jednu MAC adresu daneho PC.

Inac, ak nenapises cislo portu do prvej kolonky (service port), resp. Internal port, aj tak to musis vyberat (common service port)? Nieco tam pise o tom, ze ''If u leave blank bla, bla..''

EDIT: Zabudol som spomenut, ze ak mas napr. pre DHCP definovane: 192.168.1.2 - 192.168.1.10. A chces priradit jednu IP pre MAC adresu napevno, napr. MAC adresa XX:35:XY:45:XX pre 192.168.1.2 tak z DHCP ju odporucam vyradit a definovat DHCP nasledovne: 192.168.1.3 - 192.168.10. Pretoze niektore routre ignoruju nastavenie MAC adries a preferuju najprv DHCP, nie opacne... Treba sa s tym pohrat proste.

[Alfajk]

popis:

Virtual servers can be used for setting up public services on your LAN. A virtual server is defined as a service port, and all requests from Internet to this service port will be redirected to the computer specified by the server IP. Any PC that was used for a virtual server must have a static or reserved IP address because its IP address may change when using the DHCP function.

Service Port - The numbers of External Service Ports. You can enter a service port or a range of service ports (the format is XXX - YYY, XXX is Start port, YYY is End port).
Internal Port - The Internal Service Port number of the PC running the service application. You can leave it blank if the Internal Port is the same as the Service Port, or enter a specific port number when Service Port is a single one.
IP Address - The IP address of the PC running the service application.
Protocol - The protocol used for this application, either TCP, UDP, or All (all protocols supported by the Device).
Status - The status of this entry, "Enabled" means the virtual server entry is enabled.
Common Service Port - Some common services already exist in the pull-down list.
Modify - To modify or delete an existing entry.

To setup a virtual server entry:

Click the Add New... button.
Select the service you want to use from the Common Service Port list. If the Common Service Port menu does not list the service that you want to use, enter the number of the service port or service port range in the Service Port box.
Enter the IP address of the computer running the service application in the IP Address box.
Select the protocol used for this application in the Protocol box, either TCP, UDP, or All.
Select the Enabled option in the Status pull-down list.
Click the Save button.

Note: It is possible that you have a computer or server that has more than one type of available service. If so select another service, and type the same IP address for that computer or server.

ses z toho moudrejsi? ja moc ne,kdyz necham prvni prazdny,samo to do nej cislo doplni stejny,jako v tom internal portu

mno ale pokud vyhodim dhcp a prijde kamos,bude se chtit pripojit na wifi,tak se nepripoji,co?

/edit> na tu ip by to slo vyresit i se zaplym DHCP ne? viz Address Reservation :

Address Reservation Help

When you specify a reserved IP address for a PC in the LAN, that PC will always receive the same IP address each time when it accesses the DHCP server. Reserved IP addresses could be assigned to servers that require permanent IP settings.

MAC Address - The MAC Address of the PC that you want to reserve an IP address for.
Reserved IP Address - The IP address that the Device reserved.
Status - It shows whether the entry is enabled or not
Modify - To modify or delete an existing entry.

To Reserve IP Addresses, you can follow these steps:

Enter the MAC Address (The format for the MAC Address is XX-XX-XX-XX-XX-XX) and the IP address in dotted-decimal notation of the computer you wish to add.
Click the Save button.

To modify a Reserved IP Address, you can follow these steps:

Select the reserved address entry as you desired, modify it. If you wish to delete the entry, click the Delete link of the entry.
Click the Save button.

Click the Add New... button to add a new Address Reservation entry.

Click the Enable All button to enable all the entries in the table.

Click the Disable All button to disable all the entries in the table.

Click the Delete All button to delete all the entries in the table.

Click the Next button to go to the next page, or click the Previous button return to the previous page.

Note: The changes will not take effect until the Device reboots.

[CageJ]

Tak daj do oboch 16 000..
No mozes to urobit tak ako som ti EDITOVAL vyssie.. Iba vymedzit cast pre DHCP..

A hej to bude ono.

[Bez_n1ck]

Rezervace IP se dělá zde: https://dl.dropboxusercontent.com/u/236 ... vation.PNG
Vyplňuje se MAC adresa zařízení (zjistitelné v cmd příkazem ipconfig -all)

Portforwarding vyplň takhle https://dl.dropboxusercontent.com/u/236 ... arding.PNG a dej save.

[CageJ]

Divne, ..... starsie TP-Linky vedeli vypisat vsetky prave pripojene zariadenia s nazvom v sieti, vratane MAC adresy a dalo sa to krasne vybrat.. To uz tam nie je ?

Je to vlastne to co sme uz vyriesili. Ale ako som pisal, hlavne si over, ze router to Adress reservation preferuje nad DHCP.

[Bez_n1ck]

Jo, to je tam taky, hned o položku vedle (DHCP clients list)

[Alfajk]

tak to se me snad povedlo,ip mam pokazdy na pc 192.168.0.101 a druhej pc 192.168.0.102

jak tak ale koukam,vychozi branu mam 192.168.11.1,coz bude nejspis router v antene,do ktery samozrejme nemam pristup, tzn ze v tom pripade mam neverejnou ip,zejo?

resim problem i s tunngle - http://www.tunngle.net/wiki/Port_Forwar ... Forward.3F podle tohoto,protoze kdyz vlezu do nejakyho roomu,vidim spoustu lidi offline i kdyz oni sami jsou online a dole v rohu to pise "port closed", i kdyz mam v tom routeru nastaveno toto: port_od_tunngle 11155 port_od_tunngle 11155 moje_ip 192.168.0.101 protoklol_ALL Enabled

co se s tim da jeste delat?

[CageJ]

To je chyba tunngle.. A v nastaveniach tunngle sa dá čosi s tým portom meniť. Ďalej odporúčam porry okolo 8080.. Nie som doma, takže ti to nepozriem.

[Alfajk]

tak az budes doma,mrkni na to,ja to udelal podle ty wiki tunngle a zadna zmena,port by mel bejt otevrenej,ale porad to pise,ze port closed (UPnP mam enabled) a stejne tak kdyz dam v tunngle primo "port test" tak to pise,ze je closed

[CageJ]

noo mam tam vykliknute Tunngle DNS
Forwaded port 11155
Use UPnP ne... a funguje to, ale je pravda, ze Tunngle neukazuje uplne vsetkych online, to je proste bug
Ak vidis niektorych online, je to v pohode myslim.