GeForce 417.71 WHQL / Hotfix 417.75

[Hladis]

Gaming Technology
Includes support for NVIDIA GeForce RTX 2060 graphics cards as well as support for G-SYNC compatible monitors.

3D Vision Profiles
Added or updated the following 3D Vision profiles:
Shadow of the Tomb Raider – Not Recommended
Darksider 3 – Fair

Software Module Versions
nView – 149.34
HD Audio Driver – 1.3.38.4
NVIDIA PhysX System Software – 9.18.0907
GeForce Experience – 3.16.0.140
CUDA – 10.0

Product Support
Added support for GeForce RTX 2060

New Features
G-SYNC Compatible Support
NVIDIA G-SYNC can now be used to activate the VRR features of G-SYNC Compatible displays. G-SYNC Compatible displays have been validated by NVIDIA to not show pulsing, flickering, or other artifacts during VRR gaming. See https://www.nvidia.com/en-us/geforce/pr ... ors/specs/ for the list of GSYNC Compatible displays. G-SYNC on G-SYNC Compatible displays is supported only with NVIDIA Pascal and later GPU architectures. Only single displays are currently supported; multiple monitors can be connected but no more than one display should have G-SYNC enabled.

Fixed Issues
[GeForce GTX 1080]: GPU clock speed does not drop to idle when three monitors are enabled. [2474107]
Black screen when resuming from monitor sleep on some DisplayPort monitors. [2457142]
[Notebook]: Fixed lockup that occurred when resuming from sleep on MSI GT83 notebook [2456849]
[GeForce GTX 1060 Notebook][Gu Jian Qi Tan 3]: The application hangs during launch. [200477252]
Fixed black screen on BenQ XL2730 monitor at 144Hz refresh rate [2456730]
[Windows 7][G-SYNC]: Game FPS drops when G-SYNC is used with V-Sync. [200473408]
[SLI][3D Gaming][TU104][PG 180][Multiple apps][Win10RS5x64]Blocky Corruption when application is switched to certain resolutions [200465152]
[Shadow of the Tomb Raider]: Fixed occasional application crash in DirectX 12 mode. [200464716]

Known Issues
[SLI][Shadow of the Tomb Raider][G-SYNC]: Flickering occurs in the game when launched with SLI, HDR, and G-SYNC enabled [200467122]
[HDR][Ni no Kuni 2]: Enabling HDR causes the application to crash when launched. [2483952]
[ARK Survival]: Multiple errors and then blue-screen crash may occur when playing the game. [2453173]
[Firefox]: Cursor shows brief corruption when hovering on certain links in Firefox. [2107201]
[G-SYNC]: Random flickering occurs when connecting G-SYNC monitor + non-GSYNC HDMI monitor with G SYNC enabled. [2399845]

Realease notes:
http://us.download.nvidia.com/Windows/4 ... -notes.pdf

Forum:
https://forums.geforce.com/default/topi ... -1-15-19-/

ManuelG:

Issues and updates:
2079538-Random DPC watchdog violation error when using multiple GPUs on motherboards with PLX chips -> Use the following tool to enable MSI mode as a temporary workaround (only apply changes to each NVIDIA GPU installed):
https://github.com/CHEF-KOCH/MSI-utility/releases
2107201-Cursor shows brief corruption when hovering on certain links in Firefox/Steam
2449346-The Witcher 3 will BSOD with Bad Spooler error randomly during gameplay
2451459-Batman: Arkham Origins: Physx fog rendering incorrectly
2453173-ARK Survival may crash with bad pool caller error and eventual BSOD
2482041-Hitman2: Crash in 0x80000003 breakpoint
2453059-Random desktop flicker on some multi-display PCs

G-SYNC Compatible How-To, For Monitors Not Listed On https://www.nvidia.com/en-us/geforce/pr ... ors/specs/

Connect the monitor to your GeForce RTX 20-Series or GeForce GTX 10-Series graphics card using a DisplayPort cable
Enable the Variable Refresh Rate functionality of your display by using the monitor's controls and On-Screen Display
Open the NVIDIA Control Panel from the bottom right of Windows
Expand the "Display" section
Click on “Set up G-SYNC”
Tick the “Enable G-SYNC, G-SYNC Compatible” box
Tick the “Enable settings for the selected display model” box
Click “Apply” on the bottom right
If the above isn't available, or isn't working, you may need to go to "Manage 3D Settings", click the "Global" tab, scroll down to "Monitor Technology", select "G-SYNC Compatible" in the drop down, and then click "Apply"
Additionally, you may need to go to "Change Resolution" on the left nav and apply a higher refresh rate, or different resolution

[havli]

Fixed Issues
[GeForce GTX 1080]: GPU clock speed does not drop to idle when three monitors are enabled.

Zajimave, ja jsem si vzdycky myslel, ze tri monitory zvysuji takt GPU a potazmo VRAM "by design". A ted pisou, ze chyba opravena, hmm. No ale kdyby to vazne chodilo, tak bych mohl vypnout multidisplay power saver. Asi nejzajimavejsi novinka tohoto driveru.

[Hladis]

Se tremi monitory nejede karta na plny 3D takty, jen v jinym powerstate, ktery klidne muzou nazyvat jako idle a tahle chyba se ma tykat konkretne GTX 1080. Tedy pochybuju, ze to se trema monitorama spadne na nejnizsi idle takty.

[havli]

Asi to bude pravda. Je fakt, ze od Kepleru (kde jsem poprve pripojoval 3 monitory) se za celou dobu nic nezmenilo a zatimco dva monitory jednou na nejnizsich taktech, tri vzdy vytahly GPU nekde na 50% maximalni 3D frekvence. Nejspis teda jen oprava bugu zavedeneho v nektere z predchozich verzi. Tak nic, no.

//edit - nainstalovano a podle ocekavani se takty se tremi monitory nikam nehnuly. Stale jsou na 1455 MHz, coz teda je celkem odvaha nazyvat "idle clock".

[petsild]

Kde je slibovaný FreeSync?

[Krteq]

hned v prvním postu... jen to pojmenovali "G-SYNC Compatible"

G-SYNC Compatible How-To, For Monitors Not Listed On https://www.nvidia.com/en-us/geforce/pr ... ors/specs/

Connect the monitor to your GeForce RTX 20-Series or GeForce GTX 10-Series graphics card using a DisplayPort cable
Enable the Variable Refresh Rate functionality of your display by using the monitor's controls and On-Screen Display
Open the NVIDIA Control Panel from the bottom right of Windows
Expand the "Display" section
Click on “Set up G-SYNC”
Tick the “Enable G-SYNC, G-SYNC Compatible” box
Tick the “Enable settings for the selected display model” box
Click “Apply” on the bottom right
If the above isn't available, or isn't working, you may need to go to "Manage 3D Settings", click the "Global" tab, scroll down to "Monitor Technology", select "G-SYNC Compatible" in the drop down, and then click "Apply"
Additionally, you may need to go to "Change Resolution" on the left nav and apply a higher refresh rate, or different resolution

[blaho]

pubg ide OK kills nedavam ale driver
2xmonitor OK
Gsync OK

[Eddward]

Mam taky pocit ze FreeSync ako take je znacka AMD, takze to asi nemozu pouzit. Ale to je jedno, Freesync aj G-Sync je len komercne pomenovanie pre Adaptive Sync.

Monitor sice neriesim, ale tiez som si ovladac nainstaloval na test, po mesiaci sa uz aj nejake bugfixy nahromadili.

[Hladis]

Kde je slibovaný FreeSync?

Ten popis driveru v prvnim postu asi kopiruju pro srandu kralikum. Jen tak mimochodem, nVidia neslibovala "FreeSync". To by museli byt hodne zoufali (nebo padli na hlavu), aby pouzili znacku AMD a delali AMD reklamu. nVidia podporuje VESA standart Adaptive-sync a maji to samozrejme schovany pod svou znackou G-sync.

//
Eh Eddward rychlejsi.

[petsild]

Se divíš... když Nvidia nemá koule napsat o podpoře Adaptive-Sync.

[blaho]

Tož jako nevim co to je , ale v PUBG ve fullscreen windowed
se to chova jak s 3 fps , fullscreen de OK

[Mr_Trollfan]

Dobre vediet, mozno to aj mne pomoze odstranit stutter ked to prepnem v gta

[killerek]

Uz sem to spal v jinem vlakne, ale default nastaveni toho G-Sync je jen pro fullscreen a podporu i ve windowed modu je nutne prepnout v ovladacich.

[blaho]

to mam :

[thomas4492]

Idem na mojej gtx 1070 ešte na v. nvidia 385.28 . Treba update ked ide všetko v poriadku ? G-sync nemám. Prišlo od vtedy niečo zásadne ? Ďakujem

[Adam Vágner]

Jeden stěr jak prase (aspoň mě to ani nenapadlo, a Nvidia to snad ani nějak nezmínila) – pokud ještě někdo nemůže ten G-Sync najít, funguje to jenom na DisplayPortu.

Zkoušel jsem dva HDMI monitory a jedno kombo HDMI + DP, na tom kombu na DP jede, na HDMI není.

[thomas4492]

V zásade teda nepotrebujem update ked som spokojný ? Aj ked su dost staré už...

[Hladis]

Adam Vágner:
Zminila, je to vseobecne znama informace.

[Adam Vágner]

Kde přesně to zmínila? V tiskovce jsem to neviděl, při prezentaci nemám pocit, že by to někdo říkal (ale nemůžu říct, že bych huangov při prezentaci visel na rtech, koukal jsem na to spíš bokem).

edit: teď už to tam vidím: https://www.nvidia.com/en-us/geforce/ne ... dy-driver/

Connect the monitor to your GeForce RTX 20-Series or GeForce GTX 10-Series graphics card using a DisplayPort cable

ale včera mi to teda na ctrl+f a port skákalo až na tu diskuzi
anebo jsem byl možná na tomhle: https://www.nvidia.com/en-us/geforce/ne ... uncements/

No nic, pokud říkala, tím líp. Za mě je to ale blbé, protože krámů s HDMI a FreeSyncem tu mám víc, ale s DP jenom jeden (a myslím, že HDMI + freesync jsou přece jenom rozšířenější).

[blaho]

Tož jako nevim co to je , ale v PUBG ve fullscreen windowed
se to chova jak s 3 fps , fullscreen de OK

dneska to už islo v pohode aj na fullscreen windowed , hm...